Delphi HP10275 fuel pump hanger for the 1990-1991 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles sits in the fuel tank and carries the float arm for the gas gauge. You may also see it listed as a fuel pump hanger assembly.
- Metal tubes are routed so they never touch the tank, which removes noise and vibration while driving
- Empty float height and float retention are set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated and tested
Quick facts
- Part: Delphi HP10275 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: the 1990-1991 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles
- Condition: New
A gas gauge that reads wrong, hard starting or stalling can mean the hanger has failed. A fuel filter, a relay or the wiring can be behind those signs too, so find out which one it is before you buy.
Fits
The vehicles it fits include the 1990-1991 Ford F-250 6-cylinder 4.9L, V8 5.8L or 7.5L and the 1991 F-250 V8 5.0L, plus the 1990-1991 Ford F-350 6-cylinder 4.9L, V8 5.8L or 7.5L. Each truck takes one hanger.
Specifications
- Quantity per vehicle: 1
- Condition: New
In the box
One fuel pump hanger with float arm, lock ring, retainers, screws, a seal and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing.
- The instruction sheet in the box covers the steps.
Interchange: 953-3005 · F4TZ 9A407-R · PS-21
4011037 · 4017269 · E2064MN · DHP10275 · 67003 · P74107 · A23001 · A46101 · SP155 · SP33A1H
This part cross-references / interchanges with the following part numbers:
4011037, 4017269, E2064MN, DHP10275, 67003, P74107, 953-3005, F4TZ 9A407-R, PS-21, A23001, A46101, SP155, SP33A1H
Frequently Asked Questions
Is the Delphi HP10275 fuel pump hanger right for a 1990-1991 Ford F-250 with the V8 5.8L?
Yes. Delphi HP10275 fits the 1990-1991 Ford F-250 V8 5.8L, and each truck takes one. For any other vehicle, look it up in the "Vehicles it fits" section.
What parts come with the Delphi HP10275 fuel pump hanger?
The hanger comes with its float arm, lock ring, retainers, screws, a seal and an instruction sheet.
Do the metal tubes on this fuel pump hanger touch the tank?
No. The metal tubes are routed so they do not contact the tank at any point, which removes noise and vibration while the vehicle is running.
Can a failing fuel pump hanger make the gas gauge read wrong?
Yes, it can, because the float arm on the hanger sets what the gauge reads. A shop can test the fuel system to confirm the cause.
Should I clean the tank before installing the Delphi HP10275?
Yes. Check and clean the fuel tank before fitting the Delphi HP10275; the instruction sheet in the box covers the steps.
