Delphi FG1880 fuel pump module for the 2013-2014 Hyundai Genesis Coupe 4-cylinder 2.0L and the 2013-2016 Genesis Coupe V6 3.8L moves fuel from the tank to the engine. This Delphi fuel pump module assembly is built to Delphi's OE standards.
- Empty float height and float retention are set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Each module is validated and tested before it is matched to its application
- Design and durability aimed at lower failure rates
Quick facts
- Part: Delphi FG1880 fuel pump module
- Also called: fuel pump assembly
- Fits: 2013-2014 Hyundai Genesis Coupe 4-cylinder 2.0L and the 2013-2016 Genesis Coupe V6 3.8L
- Condition: New
Hard starting, stalling, a whine from the tank or a fuel gauge that reads wrong can mean this module is worn, though a clogged fuel filter or a bad fuel pump relay can be behind the same signs, so find the cause before you replace it.
Fits
It is a direct-fit replacement for the 2013-2014 Hyundai Genesis Coupe 4-cylinder 2.0L and the 2013-2016 Genesis Coupe V6 3.8L. The 2013-2014 Genesis Coupe 4-cylinder 2.0L and the 2013-2016 Genesis Coupe V6 3.8L each take one module, and this listing is a single module.
Specifications
- Quantity per vehicle: 1
- Float arm: included
- Condition: New
In the box
One fuel pump module with float arm, one seal and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the module.
- The instruction sheet in the box covers the installation steps.
Interchange: 31110-2M700 · 31111-2M000 · 94460-2M400 · 94460-2M401
CFG1880 · A46774 · SP3093M
This part cross-references / interchanges with the following part numbers:
CFG1880, 31110-2M700, 31111-2M000, 94460-2M400, 94460-2M401, A46774, SP3093M
Frequently Asked Questions
Does the Delphi fuel pump module fit the 2013-2016 Hyundai Genesis Coupe V6 3.8L?
Yes, Delphi FG1880 fits the 2013-2016 Hyundai Genesis Coupe V6 3.8L. It also fits the 2013-2014 Genesis Coupe 4-cylinder 2.0L.
Does this fuel pump assembly come with a float arm and seal?
Yes, the Delphi FG1880 comes with its float arm, a seal and an instruction sheet.
Will the Delphi module give a correct gas gauge reading?
This module's empty float height and float retention match OE specifications, which is meant to give a correct gas gauge reading.
Which signs can mean I need a Delphi fuel module?
Hard starting, stalling or a fuel gauge that reads wrong can mean the fuel module is worn. A shop can test the pump to confirm it.
Should I clean the fuel tank before installing this pump module?
Yes. Check and clean the fuel tank first, and follow the instruction sheet that comes in the box for the installation steps.
