Delphi AS10290 sensor for the 2018-2025 Ram 1500 3.6L and other vehicles is an ignition knock (detonation) sensor, tested and calibrated to OE standards, that detects engine knock.
- Helps maximize engine performance with all fuels
- Designed to help protect the engine from damage caused by pre-ignition knocking
- Calibrated for a wide variety of frequencies, so it can detect shifts and adjust to send accurate signals
- This Delphi knock sensor is sealed to withstand humidity, salt spray and automotive fluids
- Ground isolated design with a 2 wire shielded harness helps protect the signal from electromagnetic interference (EMI)
- Self generating piezoelectric design requires no power to the sensor
A lit check engine light, pinging under load or weaker engine performance can mean the knock sensor needs replacing. A damaged wiring harness, a loose connector or an engine that is knocking for another reason can also be behind these signs, so track down the cause before you buy.
This knock sensor is a direct-fit replacement for the 2018-2025 Jeep Wrangler 3.6L and the 2018-2024 Jeep Grand Cherokee 3.6L, along with many other Chrysler, Dodge, Jeep and Ram models. The 2018-2025 Ram 1500 3.6L takes one. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
- Quantity per vehicle: 1
- Design: self generating piezoelectric, ground isolated
- Harness: 2 wire, shielded
- Country of origin: China
In the box: one ignition knock (detonation) sensor.
Interchange: 6831 3570AA · 6831 3570AB
EKS157 · DKS367 · KS502 · 5S16412
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
EKS157, 6831 3570AA, 6831 3570AB, DKS367, KS502, 5S16412
Frequently Asked Questions
Is this the right Jeep Grand Cherokee sensor for a 2018-2024 Jeep Grand Cherokee 3.6L?
Yes, Delphi AS10290 fits the 2018-2024 Jeep Grand Cherokee 3.6L, and that engine takes one. For a different model or engine, open the "Vehicles it fits" section.
Is this Jeep Wrangler sensor the right one for a 2018-2025 Jeep Wrangler 3.6L?
Yes. Delphi AS10290 is listed for the 2018-2025 Jeep Wrangler 3.6L, one sensor per vehicle.
Does the Delphi AS10290 need power to work?
No. Its self generating piezoelectric design requires no power to the sensor, and the 2 wire shielded harness helps protect the signal from electromagnetic interference (EMI).
Could pinging or a check engine light mean this knock sensor is failing?
Yes. Pinging or a check engine light can mean the sensor is failing, and a shop can test the sensor and its wiring.
Is the Delphi AS10290 sealed against road salt and moisture?
Yes. This knock sensor is sealed to withstand humidity, salt spray and automotive fluids.
