Delphi TA5501 right outer tie rod end for the 2009-2010 Hyundai Sonata and other vehicles connects the steering linkage to the wheel's steering knuckle. The Delphi tie rod end, also called a steering tie rod end, is sold as a single piece for the right outer position.
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Fatigue tested to avoid failure
- Anti-corrosion protection applied to each part
- Tested at temperatures below -40 °C and over 120 °C, and through 720 hours of salt spray
- Necessary accessories included for a complete job
Quick facts
- Part: Delphi TA5501 tie rod end
- Also called: steering tie rod end
- Fits: 2009-2010 Hyundai Sonata and other vehicles
- Position: Right outer
- Condition: New
A worn tie rod end can show up as loose or wandering steering, uneven tire wear or a clunk over bumps. With the engine off, look at the tire tread on that side for uneven wear. Alignment or tire problems can cause it too, so find the cause before you replace the part.
Fits
It fits the 2009-2010 Hyundai Sonata, the 2008-2011 Hyundai Azera and the 2006-2009 Kia Amanti. There is one outer tie rod end on each side of the axle, and this listing is the right one. The left outer is a separate part, and the two are normally replaced at the same time.
Specifications
Fit and size
- Position: Right outer
- Quantity per vehicle: 1
Build and materials
- Condition: New
- Corrosion protection: applied to each part
Interchange: 101-5343 · 101-5876 · 56820-3K510 · 56820-3F111
KTR4575 · TO60142 · TO60142PR · ES800335 · ES800344 · GS90609 · MS90609 · MS90618 · JTE1386 · JTE7684
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-5343, 101-5876, 56820-3K510, KTR4575, 56820-3F111, TO60142, TO60142PR, ES800335, ES800344, GS90609, MS90609, MS90618, JTE1386, JTE7684
Frequently Asked Questions
Is TA5501 a 2009-2010 Hyundai Sonata tie rod replacement?
Yes. Delphi TA5501 is the right outer tie rod end for the 2009-2010 Hyundai Sonata. The left outer is a separate part.
Is there a Delphi tie rod for the right side of the 2006-2009 Kia Amanti?
Yes. Delphi TA5501 fits the 2006-2009 Kia Amanti as the right outer tie rod end, one on each side of the axle.
How are the ball studs on this tie rod end made?
Delphi machines the ball studs to micron tolerances for durability and smooth joint operation, and the tie rods are fatigue tested to avoid failure.
How can I tell if a right outer tie rod end is worn?
Loose or wandering steering, uneven tire wear or a torn boot at the joint can go with a worn tie rod end. A shop can check the joint for play.
What temperature and salt-spray testing does the TA5501 tie rod end get?
Delphi tests these parts below -40 °C and over 120 °C and exposes them to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
