Delphi TC6847 front left lower control arm with ball joint for the 2013-2016 Acura RDX links the front left wheel to the vehicle and lets it move with the suspension. This control arm and ball joint assembly replaces the arm and its ball joint in one piece.
- 100% crack detection and ultrasonic flaw detection on every control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded control arm for consistent performance and quality
- Anti-corrosion protection applied to each part
- Tested below -40 °C and above 120 °C and through 720 hours of salt spray
Quick facts
- Part: Delphi TC6847 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2013-2016 Acura RDX
- Position: Front left lower
- Condition: New
A clunk over bumps, uneven front tire wear or loose-feeling steering can mean the lower arm or its ball joint is worn. Before you replace this arm, rule out a worn sway bar link, strut mount or tie rod end, since those can make similar noises.
Fits
This is a direct-fit replacement for the 2013-2016 Acura RDX. Each side of the front axle takes one lower arm; this listing is the front left one, so the front right is ordered separately, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: front left lower
- Quantity per vehicle: 1 for this position
- Sold: one per listing
Build and materials
- Type: control arm with ball joint
- Corrosion protection: anti-corrosion protection
- Condition: New
Interchange: 51360-TX4-A01
1028168 · 527065 · CB50193 · CB50193PR · CMS601259
This part cross-references / interchanges with the following part numbers:
1028168, 51360-TX4-A01, 527065, CB50193, CB50193PR, CMS601259
Frequently Asked Questions
Does the Delphi TC6847 control arm fit the 2013-2016 Acura RDX?
Yes. Delphi TC6847 is the front left lower control arm with ball joint for the 2013-2016 Acura RDX. The front right side is a separate part.
How is the Delphi TC6847 tested before it is sold?
Every arm gets 100% crack detection and ultrasonic flaw detection. Delphi parts are tested below -40 °C and above 120 °C and through 720 hours of salt spray.
Does this lower control arm come with the ball joint?
Yes. The ball joint is part of this control arm assembly, so it is not bought separately.
Could a clunk over bumps come from a worn front lower control arm?
It can, if the arm or its ball joint is worn. Uneven front tire wear and loose-feeling steering are other signs, and worn suspension should be inspected promptly.
Which part numbers does Delphi TC6847 cross-reference?
Delphi TC6847 is listed against 51360-TX4-A01, 1028168 and 527065, along with CB50193, CB50193PR and CMS601259.
