Delphi TC7277 rear right upper control arm with ball joint for the 2004-2009 Nissan Quest connects the rear wheel assembly to the body and lets the wheel pivot. The Delphi control arm arrives as a control arm and ball joint assembly, with the ball joint already attached.
- Control arm withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray in testing
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded control arm for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC7277 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2004-2009 Nissan Quest
- Position: Rear right upper
- Condition: New
A clunk over bumps, uneven tire wear or a loose feel at the rear wheel can mean a worn arm or ball joint. Before you replace it, rule out worn bushings, a tired shock or a loose fastener, which can produce similar signs. Plan to replace the rear left and rear right upper arms as a pair; this listing is one arm.
Fits
This arm fits the 2004-2009 Nissan Quest, which takes one upper arm on each side of the rear axle. The rear left is a separate part.
Specifications
Fit and size
- Position: Rear right upper
- Quantity per application: 1
Build and materials
- Type: control arm with ball joint, sold as one assembly
- Construction: robot-welded
- Finish: anti-corrosion protection
- Condition: New
Interchange: 102-8255 · 55501-CK000 · 52-1696
CB69518 · CB69518PR · RK621722 · CMS30129 · GS30129
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
102-8255, 55501-CK000, 52-1696, CB69518, CB69518PR, RK621722, CMS30129, GS30129
Frequently Asked Questions
Is this the control arm for the 2004-2009 Nissan Quest?
Yes. Delphi TC7277 is the rear right upper control arm with ball joint for the 2004-2009 Nissan Quest. The rear left is a separate part.
How tight are the ball stud tolerances on this control arm?
The ball studs are machined to micron tolerances for durability and smooth joint operation.
How was the TC7277 tested for cold, heat and corrosion?
Delphi TC7277 withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray. It also has anti-corrosion protection applied.
What can a worn rear upper control arm ball joint sound like?
A clunk over bumps, uneven tire wear or a loose feel at the rear wheel can mean a worn arm or ball joint. A shop can confirm which part is at fault.
Are these control arms inspected for cracks?
Yes. Each arm goes through 100% crack detection and ultrasonic flaw detection, and the arms are robot-welded.
