Delphi TC7636 front right lower control arm with ball joint for the 2001 Dodge Stratus V6 3.0L and other vehicles connects the wheel to the chassis and pivots as the suspension moves. Delphi develops it with dimensional and material analysis and tests it for OE performance.
- 100% crack detection and ultrasonic flaw detection on the control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded arm for consistent performance and quality
- Anti-corrosion protection applied to the part
- Tested from below -40 degrees C to over 120 degrees C and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC7636 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2001 Dodge Stratus V6 3.0L and other vehicles
- Position: Front Right Lower
- Condition: New
A clunk over bumps, uneven tire wear or loose steering can come from a worn ball joint or from other worn suspension parts. With the engine off, look the ball joint and arm over for cracks, rust or visible damage; a shop can measure play in the joint. Find out which part is behind the symptom first, and replace this arm if it is the one.
Fits
It is listed for a range of Chrysler, Dodge and Mitsubishi models, including the 2001 Chrysler Sebring V6 3.0L and the 1999-2000 Mitsubishi Galant V6 3.0L. This listing is one arm for the front right lower position; the 2001 Dodge Stratus V6 3.0L takes one there, and the front left lower is a separate part normally replaced at the same time.
Specifications
Fit and size
- Position: Front Right Lower
- Quantity for this position: 1
- Engine: V6-3.0L
Build and materials
- Type: control arm with ball joint
- Construction: robot-welded
- Ball studs: machined to micron tolerances
- Coating: anti-corrosion protection
- Condition: New
In the box
One front right lower control arm with ball joint.
Interchange: 522-602
MR369796 · CB67134 · CB67134PR · RK621754 · CMS251081 · GS251081 · MR369792
This part cross-references / interchanges with the following part numbers:
MR369796, 522-602, CB67134, CB67134PR, RK621754, CMS251081, GS251081, MR369792
Frequently Asked Questions
Is the Delphi TC7636 right for a 2001 Dodge Stratus V6 3.0L?
Yes. Delphi TC7636 is listed for the 2001 Dodge Stratus V6 3.0L in the front right lower position. For another car, look up your year, model and engine in the "Vehicles it fits" section.
Which side does this Delphi lower control arm cover?
Delphi TC7636 is for the front right lower position, and the listing is one arm. The front left lower is a separate part.
Does this control arm and ball joint assembly come with the ball joint attached?
Yes. This part is a control arm with ball joint, supplied as one front right lower assembly.
How is this Delphi control arm protected against rust?
Anti-corrosion protection is applied to the part. Delphi also exposes these parts to 720 hours of salt spray in testing.
Does Delphi TC7636 replace CB67134?
Yes. CB67134 is one of the other numbers Delphi TC7636 replaces, along with 522-602 and MR369792.
