Delphi TC7817 front right upper control arm with ball joint for the 2016-2024 Mercedes-Benz GLC300 and other vehicles locates the wheel and lets it pivot as the suspension moves.
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding on the control arm for consistent performance and quality
- Anti-corrosion protection applied to each part
- Tested at temperatures below -40 degrees C and over 120 degrees C and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC7817 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2016-2024 Mercedes-Benz GLC300 and other vehicles
- Position: Front Right Upper
- Condition: New
A clunk over bumps, loose steering feel or uneven front tire wear can mean the upper arm or its ball joint is worn. Before you replace this arm, rule out tie rods, strut mounts, tire condition and alignment, which can also clunk, wander or wear tires unevenly.
Fits
This control arm with ball joint is a direct-fit replacement for the 2016-2024 Mercedes-Benz GLC300, the 2019-2024 Mercedes-Benz E450 and the 2020-2024 Mercedes-Benz E350, with one arm needed at the front right. The front left uses its own part, and the two sides are normally replaced together. If your Mercedes-Benz is not named here, look up its year and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front Right Upper
- Quantity per vehicle: 1 (this side)
Build and materials
- Welding: robot-welded
- Corrosion protection: anti-corrosion protection on each part
- Condition: New
- Country of origin: Turkey
Interchange: 102-7945
205 330 56 01 · A 205 330 56 01 · 526272 · KSC5478 · CB28128 · CB28128PR · RK623600 · CMS101468 · GS101468
This part cross-references / interchanges with the following part numbers:
102-7945, 526272, KSC5478, CB28128, CB28128PR, RK623600, 205 330 56 01, A 205 330 56 01, CMS101468, GS101468
Frequently Asked Questions
Is this Delphi control arm the right one for the 2016-2024 Mercedes-Benz GLC300?
Yes. Delphi TC7817 is a front right upper control arm with ball joint for the 2016-2024 Mercedes-Benz GLC300, and that car takes one. Other years and models are listed in the "Vehicles it fits" section.
Which side and position does the Delphi TC7817 go on?
Delphi TC7817 is the front right upper arm. The front left upper arm is a separate part and is ordered on its own.
What heat, cold and salt exposure do these control arms withstand?
They withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
Can a clunk over bumps mean the ball joint on an upper control arm is worn?
Yes, a clunk over bumps, loose steering feel or uneven front tire wear can mean a worn ball joint or arm. Have the front suspension inspected promptly rather than driving on it.
Does the control arm and ball joint assembly come with the ball joint attached?
Yes. This listing is a control arm with the ball joint included as one assembly, so the joint is not bought separately.
