Delphi TC7994 front right lower control arm with ball joint for the 2016-2017 Subaru Crosstrek and other vehicles links the wheel to the chassis. It is also called a control arm and ball joint assembly, because the arm and ball joint come as one piece.
- Control arm tested at temperatures below -40 degrees C and over 120 degrees C
- Control arm exposed to 720 hours of salt spray in testing
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded control arm for consistent quality, with anti-corrosion protection on each part
Quick facts
- Part: Delphi TC7994 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: the 2016-2017 Subaru Crosstrek and other vehicles
- Position: Front Right Lower
- Condition: New
A clunk over bumps, uneven front tire wear or a loose steering feel can mean the arm or its ball joint is worn. With the engine off, look the arm and ball joint boot over for cracks, tears or rust first, since tie rods, bushings and struts can produce similar signs.
Fits
It fits the 2016-2017 Subaru Crosstrek and the 2013-2015 Subaru XV Crosstrek, and each needs one arm at the front right. This listing is one arm; the front left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front Right Lower
- Quantity per application: 1
- Sold as: one control arm with ball joint
Build and materials
- Type: control arm with ball joint assembly
- Ball studs: machined to micron tolerances
- Construction: robot-welded
- Finish: anti-corrosion protection
- Condition: New
- Country of origin: Turkey
Interchange: 20202 FJ040 · KSC5907 · RK623561 · CMS801225
This part cross-references / interchanges with the following part numbers:
KSC5907, RK623561, CMS801225, 20202 FJ040
Frequently Asked Questions
Does the Delphi control arm TC7994 fit the 2013-2015 Subaru XV Crosstrek?
Yes. Delphi TC7994 is listed for the 2013-2015 Subaru XV Crosstrek, and it goes on the front right lower position.
Is the ball joint already attached to the TC7994 arm?
Yes. Delphi TC7994 is sold as an arm with the ball joint included, and its ball studs are machined to micron tolerances.
How is this front right lower arm protected against rust?
Anti-corrosion protection is applied to each part, and the parts are exposed to 720 hours of salt spray in testing.
What can a worn lower control arm or ball joint feel like?
A clunk over bumps, uneven front tire wear or a loose steering feel can all be signs of a worn arm or ball joint. A shop can check joint play on a lift.
Does Delphi TC7994 replace KSC5907?
Yes. KSC5907 is listed as an interchange number for Delphi TC7994, along with 20202 FJ040, RK623561 and CMS801225.
