Delphi TC2453 front right lower control arm for the 2009-2012 Audi Q5 and other vehicles holds the front right wheel to the body while the suspension moves. This Delphi control arm is made for the front right lower forward position.
- Tested to withstand temperatures below -40 degrees C and over 120 degrees C, and 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on the arm's material
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC2453 control arm
- Also called: suspension control arm
- Fits: 2009-2012 Audi Q5 and other vehicles
- Position: Front right lower forward
- Condition: New
A worn suspension control arm can show up as a clunk over bumps, uneven tire wear or a steering pull. Worn ball joints, sway bar links, struts or tie rods can be behind those signs too, so find the cause before buying this arm.
Fits
It fits the 2009-2012 Audi Q5 as a lower control arm, and it is a control arm for the 2009-2012 Audi S4 and the 2012 Audi A6; each takes one at the front right. This listing is one arm, the front left is a separate part, and the two on that axle are normally replaced together. If your Audi is not named here, open the "Vehicles it fits" section and check your exact model and engine.
Specifications
Fit and size
- Position: front right lower forward
- Quantity per vehicle: 1
- Sold individually
Build and materials
- Condition: new
- Construction: robot-welded
- Corrosion protection: anti-corrosion protection on each part
Interchange: 8K0 407 152 B · 8K0 407 152 C · 8K0 407 152 D · 102-7562 · 623.44054 · 521-256
CA12144 · KSC4340 · CA12144PR · CB74283 · CK641153 · K641153 · RK641153 · CMS70148 · MS70148 · JTC2105
This part cross-references / interchanges with the following part numbers:
8K0 407 152 B, 8K0 407 152 C, 8K0 407 152 D, 102-7562, 623.44054, 521-256, CA12144, KSC4340, CA12144PR, CB74283, CK641153, K641153, RK641153, CMS70148, MS70148, JTC2105
Frequently Asked Questions
Is TC2453 the right control arm for a 2009-2012 Audi Q5?
Yes. Delphi TC2453 is a front right lower forward control arm for the 2009-2012 Audi Q5, and it takes one per vehicle at that position.
Is Delphi TC2453 a left or right control arm?
It is a right-side arm, made for the front right lower forward position. The front left is a separate part and is ordered on its own.
How is this control arm protected against corrosion?
Anti-corrosion protection is applied to each part, and Delphi exposes its parts to 720 hours of salt spray in testing.
Can a worn lower control arm make a clunk over bumps?
Yes, a worn arm can contribute to a clunk over bumps, uneven tire wear or a steering pull. A shop can inspect the arm and the joints around it.
How are the ball studs on Delphi TC2453 made?
Delphi machines the ball studs on TC2453 to micron tolerances for smooth joint operation, and the arm itself is robot-welded.
