Raybestos Brakes Disc Brake Caliper P/N:FRC11714
Clamp the front-left brake pads onto the rotor with steady hydraulic force using the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper and Bracket Assembly (FRC11714). This floating, dual-piston unit installs in the front-left (driver's-side) position and is engineered for GM full-size trucks and SUVs — 2005-2008 Chevrolet Silverado 1500 and GMC Sierra 1500 [All], the 2007 Silverado 1500 Classic and Sierra 1500 Classic [All], plus the 2007-2008 Chevrolet Avalanche, Suburban 1500, Tahoe, GMC Yukon and Yukon XL 1500, and Cadillac Escalade / Escalade ESV / Escalade EXT [All] (see the Buyer's Guide tab for the full list).
- Remanufactured from OE cores: castings, guide pins and brackets are inspected before reuse, with all-new seals, boots and bleeders fitted.
- New sealing components: seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings are replaced with new materials to support leak-free operation.
- EPDM70 rubber components for heat resistance, performance and durability; silicone boots are used on applicable heavy-duty applications.
- 100% pressure tested; materials match OE specifications. Two pistons measure 2.003 in (50.876 mm); cast iron body with a coated finish; M10x1.50 bleeder thread; mounting bracket included. Country of origin: Mexico.
Interchange: 18-B4919 · 18B4919 · 15-14304 · 1514304 · 15-14438 · 1514438 · 99-17383B · 9917383B · 18-P4919 · 18P4919 · 141.66044 · 14166044 · SC1007 · 14-4304 · 144304 · Manufacturer part number FRC11714.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What position does this caliper fit?
The catalog lists it as the front-left (driver's-side front) caliper for the listed applications. Confirm fitment for your vehicle in the Buyer's Guide tab.
Is the mounting bracket included?
Yes. This is a semi-loaded caliper and bracket assembly, so the mounting bracket is included. Brake pads are not listed among the included components.
What parts are replaced during remanufacturing?
The seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings are replaced with new materials, while castings, guide pins and brackets are inspected before reuse.
How many pistons does it have and what size?
It is a floating caliper with two pistons, each measuring 2.003 in (50.876 mm). The body is cast iron with a coated finish.
Should I replace both front calipers together?
This listing is for one caliper (front left). Replacing calipers on both sides of the axle together is a common best practice for balanced braking; follow your service procedure.
Write a Review