Raybestos Brakes FRC11826 rear right brake caliper for the 2007-2018 Chevrolet Silverado 1500 and other vehicles squeezes the brake pads against the rotor to slow the wheel. This R-Line disc brake caliper is remanufactured and comes as a semi-loaded caliper and bracket assembly.
- R-Line non-plated remanufactured caliper using all new rubber and sealing components
- Castings, guide pins and brackets are inspected before they are reused
- New seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings for leak-free operation
- EPDM70 rubber components for heat resistance and durability
- 100% pressure tested
- Silicone boots for heavy-duty applications, where applicable
Quick facts
- Part: Raybestos Brakes FRC11826 brake caliper
- Also called: disc brake caliper
- Fits: 2007-2018 Chevrolet Silverado 1500 and other vehicles
- Position: Rear right
- Material: Aluminum
- Condition: Remanufactured
A sticking or leaking caliper can show up as pulling to one side, a dragging brake or fluid around the wheel. These signs alone do not prove the caliper is at fault; a worn brake hose can produce a similar pull. This listing is one rear right caliper, which takes one on the 2007-2018 Chevrolet Silverado 1500; the rear left is a separate part, ordered on its own, and the two sides are normally replaced together.
Fits
It is a direct-fit replacement for the 2007-2018 Chevrolet Silverado 1500, the 2007-2018 GMC Sierra 1500 and the 2007-2020 Chevrolet Tahoe, and it is listed for a wide range of other Chevrolet, GMC and Cadillac models. If your vehicle is not one of these, look up its year and model on the Buyer's Guide tab.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1 (this side)
- Caliper type: Floating
- Piston quantity: 1
- Piston diameter: 50.876 mm (2.003 in)
- Bleeder screw thread: M10X1.00
- Bracket mounting hole size: M14
- Casting number: K244-093, Y5101
Build and materials
- Condition: Remanufactured, semi-loaded
- Caliper casting material: Aluminum
- Surface finish: Coated (caliper and bracket)
- Country of origin: Mexico
In the box
One rear right caliper with its mounting bracket.
Interchange: 18-B5031 · 99-17397B · 16-5031 · 18-P5031 · 19-B2752 · 141.34555 · 141.66529 · 142.66529 · 10-4309S · 14-4309
SC0198C · SC2856
This part cross-references / interchanges with the following part numbers:
18-B5031, 99-17397B, 16-5031, 18-P5031, 19-B2752, 141.34555, 141.66529, 142.66529, SC0198C, SC2856, 10-4309S, 14-4309
