Raybestos Brakes Disc Brake Caliper P/N:FRC11529N
Raybestos Brakes FRC11921 rear left brake caliper for the 2007-2017 Chevrolet Equinox and other vehicles squeezes the brake pads against the rotor to slow the wheel. It is a remanufactured, semi-loaded disc brake caliper and bracket assembly.
A sticking or leaking caliper can show up as the vehicle pulling to one side, one pad wearing faster than its mate, or brake fluid near the wheel. Worn pads or a worn rotor can be behind those signs too, so find the cause before you buy.
The vehicles it fits include the 2007-2017 Chevrolet Equinox, the 2010-2017 GMC Terrain and the 2012-2015 Chevrolet Captiva Sport. If your vehicle isn't named here, look for it in the "Vehicles it fits" section. This listing is one caliper for the rear left; the rear right is a separate part ordered on its own, and the two sides are normally replaced together.
Fit and size
Build and materials
One remanufactured caliper and bracket assembly.
Interchange: 99-01420A · 18-B5040 · 18-P5040 · 141.66534 · 10-4402S · 14-4402
SC1047
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Chevy Equinox brake caliper right for the 2007-2017 model years?
Yes. Raybestos Brakes FRC11921 is a rear left caliper for the 2007-2017 Chevrolet Equinox, and the 2010-2017 GMC Terrain is also covered. For another vehicle, look it up in the "Vehicles it fits" section.
What size is the piston on this rear left caliper?
The piston measures 40.4 mm (1.591 in) across. The bleeder screw thread is M10x1, and the bracket mounting holes are 12.000 mm with a 1.750 mm thread pitch.
Does this remanufactured caliper get new seals and bleeder screws?
Yes. On Raybestos Brakes FRC11921, seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings are replaced with new parts; castings, guide pins and brackets are inspected before reuse.
How can I tell if a rear brake caliper is sticking?
Signs can include the vehicle pulling to one side, a burning smell after driving, or one pad wearing faster than the other. A shop can test the brakes to confirm what is going on.
Is this remanufactured caliper tested before it is sold?
Yes. Every caliper is 100% pressure tested and also tested for reliable braking performance. Its rubber components are EPDM70.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.