Dorman - First Stop Drum Brake Wheel Cylinder P/N:W610189
Help your drum brakes apply with steady hydraulic force using the Dorman drum brake wheel cylinder W37034 from the First Stop line. It fits many vehicles, among them the 1977-1979 Ford F-7000, 1977-1983 Ford F-700 and 1983 Ford B-600. Depending on the application, it is cataloged for the front right lower, front right upper and rear right lower positions. See the Buyer's Guide tab for the full list.
The wheel cylinder takes hydraulic pressure from the master cylinder and uses it to push the brake shoes outward against the drum. Dorman built this unit as a direct replacement for the original wheel cylinder, and it is manufactured and tested for quality assurance.
A wheel cylinder may need replacing if you see brake fluid seeping at the drum or backing plate, fluid-soaked shoes, a soft or sinking pedal, or pulling to one side under braking. Other brake faults can cause these same signs, so diagnose the brake system before replacing parts, and bleed the brakes after installation.
Interchange: 84-50008 · 84-58020 · W-92020 · 134.82020 · 135.82020 · 375-71031
8450008 · 8458020 · W92020 · 13482020 · 13582020 · 37571031 · 18E53 · W906215 · 33715 · 2908734 · 2909476 · WC250100 · C4TZ2061D · C9TZ2061A · 2622821 · 5473078 · 341038C91 · 43376 · WC37034 · F43376 · WC43376
This part cross-references / interchanges with the following part numbers:
What does a drum brake wheel cylinder do?
It takes hydraulic pressure from the master cylinder and pushes the brake shoes outward against the drum. Rubber cups inside the bore seal in the brake fluid.
Which trucks does the Dorman W37034 fit?
It fits many vehicles, among them the 1977-1979 Ford F-7000, 1977-1983 Ford F-700 and 1983 Ford B-600. See the Buyer's Guide tab for the full list.
Which wheel position is this wheel cylinder for?
Depending on the application, it is cataloged for the front right lower, front right upper and rear right lower positions.
What are signs a wheel cylinder may need replacing?
Fluid seeping at the drum or backing plate, fluid-soaked shoes, a soft or low pedal, or pulling to one side may indicate a leaking wheel cylinder. Other brake faults can cause similar signs.
Is anything needed after installing a new wheel cylinder?
Replacing a wheel cylinder opens the hydraulic system, so the brakes must be bled afterward. Follow the vehicle service information for the procedure and torque values.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.