Front Right Lower Control Arm with Ball Joint for 2006-2011 Buick Lucerne & More - Dorman 520-394

Be the first to review this product
$192.99
MPN: 520-394
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Dorman - OE Solutions Suspension Control Arm and Ball Joint Assembly P/N:520-394
Dorman - OE Solutions Suspension Control Arm and Ball Joint Assembly P/N:520-394
$192.99

Dorman 520-394 front right lower control arm with ball joint for the 2006-2011 Buick Lucerne and other vehicles connects the steering knuckle to the frame. This Dorman control arm from the OE Solutions line was evaluated for a smooth ride, directional stability and predictable dynamics.

  • Standard replacement grade
  • Casting/Forged aluminum arm with rubber bushings
  • Threaded ball joint stud
  • Additional coatings for rust and corrosion resistance

Quick facts

  • Part: Dorman 520-394 control arm with ball joint
  • Also called: control arm and ball joint assembly
  • Fits: 2006-2011 Buick Lucerne and other vehicles
  • Position: Front right lower
  • Material: Aluminum arm, rubber bushings
  • Condition: New

A clunk over bumps, vague or wandering steering or uneven tire wear can mean this front lower arm or its ball joint is worn, though a worn sway bar link or wheel bearing can be behind the same signs, so find the cause before you replace anything.

Fits

This Dorman lower control arm fits the 2006-2011 Cadillac DTS and the 2006-2011 Buick Lucerne. A 2006-2011 Buick Lucerne takes one arm at the front right, and this listing is that one arm; the front left lower arm on the same axle is a separate part, and the pair is normally replaced together.

Specifications

Fit and size

  • Position: Front right lower
  • Quantity per listing: 1
  • Mounting hole diameter: 12.3 mm
  • Mounting hole quantity: 1
  • Ball joint thread diameter: 14 mm
  • Maximum width: 288.5 mm
  • Maximum length: 237 mm

Build and materials

  • Control arm type: Casting/Forged
  • Control arm material: Aluminum
  • Bushing material: Rubber
  • Ball joint stud: Threaded
  • Grade: Standard replacement
  • Condition: New
  • Country of origin: China

In the box

One control arm with ball joint and mounting hardware. No grease fitting is included.

Installation notes

  • Ball joint and bushings are pre-installed, saving time and labor.
  • The ball joint is pre-greased.

Interchange: 810-232829B · 622.62037 · 623.62037
TC6339 · CA16259 · 15939600 · 25750676 · RK80355 · FA4873 · GK80355 · CMK80355 · 2605879 · 5CB50009 · SK520394 · JTC1826

This part cross-references / interchanges with the following part numbers:

810-232829B, 622.62037, 623.62037, TC6339, CA16259, 15939600, 25750676, RK80355, FA4873, GK80355, CMK80355, 2605879, 5CB50009, SK520394, JTC1826

Frequently Asked Questions

Does the Dorman 520-394 control arm with ball joint fit the 2006-2011 Cadillac DTS?

Yes. Dorman 520-394 is a front right lower arm that fits the 2006-2011 Cadillac DTS and the 2006-2011 Buick Lucerne.

Are Dorman control arm bushings included with this assembly?

Yes. Dorman 520-394 comes with rubber bushings and the ball joint already installed on the aluminum arm.

Is this Dorman suspension control arm and ball joint assembly pre-greased?

Yes, the ball joint is pre-greased. This front right lower arm does not include a grease fitting.

What thread diameter does the ball joint on this Dorman suspension control arm have?

The threaded ball joint stud has a 14 mm thread diameter. The arm's mounting hole measures 12.3 mm.

Is 15939600 an interchange number for the Dorman 520-394?

Yes. 15939600 is listed as an interchange number for Dorman 520-394, along with 25750676 and 810-232829B.