Dorman - OE Solutions Suspension Control Arm and Ball Joint Assembly P/N:524-524
Upgrade past the bushing that Dorman identifies as a frequent weak point with the Dorman OE FIX control arm with ball joint 524-381, a front left lower forward replacement for the 2011-2023 Dodge Charger, 2011-2023 Chrysler 300 and 2011-2023 Dodge Challenger. It is a direct-fit replacement for specified rear-wheel-drive applications without high-performance suspensions. See the Buyer's Guide tab for engine details.
Dorman notes that when the original assembly fails on these cars, the bushings are often the reason. The factory bushings are undersized for certain applications and are made from rubber that can weaken and break down prematurely. Installing another replacement that lacks a tougher bushing can lead to similar future failures and possible driveability issues. Those repeat repairs and the downtime they cause add up quickly, especially for car service, limousine and law enforcement fleets.
For optimal performance and service life, Dorman recommends replacing both assemblies. This Dorman control arm covers the front left lower forward position.
Interchange: 800-498458B
800498458B · 4670509AB · 4670509AC · 4670509AD · 4670509AE · 4670509AF · 5168653AC · 68225315AB · 68238601AB · TC5738 · CA3965 · CK622225 · RK620258 · RK622225 · GS251123 · CMS251123 · 2607225 · 2607225M · 2CB25203 · SK522801 · 1506109 · X13CJ1450
This part cross-references / interchanges with the following part numbers:
Will this control arm fit the 2011-2023 Dodge Charger and 2011-2023 Chrysler 300?
Yes. It is a direct-fit front left lower forward replacement for specified RWD models without high-performance suspensions. See the Buyer's Guide tab for the full list.
What makes this control arm and ball joint assembly an upgrade?
It uses an oversized, heavy-duty two-piece bushing made from denser, more durable rubber. The bushing spreads the suspension load over a greater area, which addresses the undersized factory bushing Dorman cites.
Which side is this lower control arm for?
It replaces the front left lower forward arm only. For optimal performance and service life, Dorman recommends replacing both assemblies.
Do I need special tools or a shop press to install it?
No. Professional technicians and experienced DIYers can install this assembly without special tools or a shop press. Follow the vehicle service information for torque specs, and check the alignment afterward.
What are signs a control arm may need replacing?
Common signs include clunking over bumps, loose or wandering steering, uneven tire wear, and cracked or torn bushings. Diagnose the cause first, because other suspension parts can cause similar symptoms.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.