Dorman Bolt P/N:981-230D
Dorman 980-230D bolt holds parts together through a hex head with a built-in flange. These Dorman flange bolts come four to a pack, and the flange spreads clamping load under the head.
A bolt like this may need replacing when its threads are stripped or rusted, the hex head is rounded off, or the shank is bent. Before you replace one, rule out a damaged threaded hole, because worn threads in the hole can look like a bad bolt.
This bolt is sold by size, not by vehicle, so match the thread size and length to the bolt you are replacing.
Fit and size
Build and materials
Four bolts.
Interchange: 006040 · 5026
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Dorman bolt fit my car?
Dorman 980-230D is sold by size, not by vehicle. Match its M6-1 thread and 30 mm thread length to the bolt you are replacing.
How many flange bolts come in the 980-230D pack?
The pack holds four bolts, each with a flanged hex head.
What grade is this M6 flange bolt, and is it zinc-plated?
Yes, it has a yellow zinc finish, and it is Class 10.9 heat-hardened steel.
How can I tell if an M6 hex bolt like this is worn?
Look for stripped or rusted threads, a rounded hex head or a bent shank, with the engine off and cool. A shop can check anything you cannot judge by eye.
Is 5026 a cross-reference number for the Dorman 980-230D?
Yes, 5026 is listed as an interchange number for Dorman 980-230D, along with 006040.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.