Raybestos Brakes FRC11509 front right brake caliper for the 2003-2007 Ford E-250 and other vehicles squeezes the brake pads against the rotor. It is a remanufactured semi-loaded caliper and bracket assembly, also called a disc brake caliper.
- Raybestos R-Line non-plated remanufactured caliper
- All new rubber and sealing components, including seals, boots and bleeders
- Castings, guide pins and brackets are inspected before they are reused
- New abutment hardware, banjo bolts and O-rings for leak-free operation
- 100% pressure tested
- EPDM70 rubber components for heat resistance and durability
Quick facts
- Part: Raybestos Brakes FRC11509 brake caliper
- Also called: disc brake caliper
- Fits: 2003-2007 Ford E-250 and other vehicles
- Position: Front right
- Material: Cast iron
- Condition: Remanufactured
A fluid leak around the caliper, pads that wear unevenly or a pull to one side while braking can mean the caliper is sticking or leaking. These signs alone do not prove the caliper is at fault, since a collapsed brake hose can cause a pull too.
Fits
It fits the 2003-2007 Ford E-250, the 1999-2007 Ford E-350 Super Duty and the 2002-2005 Ford E-350 Club Wagon. This listing is one caliper for the front right, and that side takes one. The front left is a separate part, and the two sides of that axle are normally done at the same time. If your Ford is not named here, look up its year and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front right
- Quantity per application: 1
- Caliper piston diameter: 56.1 mm (2.209 in)
- Bleeder screw thread: 3/8-24
- Bracket mounting hole: 16 mm, thread pitch 2 mm
Build and materials
- Type: Semi-loaded caliper and bracket assembly
- Caliper type: Floating
- Casting material: Cast iron
- Condition: Remanufactured
- Country of origin: Mexico
Interchange: 18-B4760 · 18-P4760 · 99-18039A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
18-B4760, 18-P4760, 99-18039A
Frequently Asked Questions
Does the Raybestos Brakes FRC11509 work as a Ford E-250 brake caliper for a 2003-2007 model?
Yes. The Raybestos Brakes FRC11509 fits the 2003-2007 Ford E-250 on the front right side. It is one caliper; the front left is a separate part.
What piston size does this front right caliper have?
The piston diameter is 56.1 mm (2.209 in). This is a floating caliper with a 3/8-24 bleeder screw thread.
What is replaced when this Raybestos Brakes FRC11509 caliper is remanufactured?
Seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings are replaced with new parts. Castings, guide pins and brackets are inspected before reuse.
How can I tell if a front right caliper is going bad?
Brake fluid around the caliper or a pull toward one side while braking can be signs. Uneven pad wear found during a brake service can be another. A shop can test the rest.
Does this caliper replace 18-B4760?
Yes. 18-B4760 is one of the numbers Raybestos Brakes FRC11509 replaces, along with 18-P4760 and 99-18039A.
