Raybestos Brakes Disc Brake Caliper P/N:FRC10982

Be the first to review this product
$82.99
MPN: FRC10982
UPC: 753497955222
Item Package Quantity: 1

Have questions?

Raybestos Brakes Disc Brake Caliper P/N:FRC10982
Raybestos Brakes Disc Brake Caliper P/N:FRC10982
$82.99

Bring smooth, sure braking back to your Subaru's front-left corner with the Raybestos R-Line Semi-Loaded Disc Brake Caliper and Bracket Assembly (FRC10982). This remanufactured floating caliper installs at the FRONT LEFT position and drops in as a direct-fit replacement for the 1998-2002 Subaru Forester [All], 1998-2001 Subaru Impreza [All] and [H4-2.5L], 1996-2002 Subaru Legacy [All], and the 2000 Subaru Outback [All].

Raybestos rebuilds these non-plated calipers from OE cores, carefully inspecting the castings, guide pins, and brackets before reuse and installing all-new rubber and sealing parts.

  • New sealing components: seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings are replaced with new materials for leak-free operation.
  • EPDM70 rubber: components chosen for heat resistance, performance, and durability; silicone boots fitted for heavy-duty applications where applicable.
  • Materials match OE specifications and vehicle-specific designs, with a cast-iron caliper casting and a 1.677 in (42.6 mm) piston.
  • 100% pressure tested to help confirm reliable braking performance.

Bleeder screw thread M7x1; bracket mounting hole 12.000 mm with a 1.250 mm thread pitch. Country of origin: Mexico. For balanced braking, service both sides as needed.

Interchange: 19-B1949 · 19B1949 · 99-01321B · 9901321B · 19-P1949 · 19P1949 · 141.47034 · 142.47034 · SC1733 · 14-8490 · 148490. Manufacturer part number FRC10982.

This part cross-references / interchanges with the following part numbers:

19-B1949, 99-01321B, 19-P1949, 141.47034, 142.47034, SC1733, 14-8490

Frequently Asked Questions

Which vehicles does this caliper fit?

It fits the 1998-2002 Subaru Forester [All], 1998-2001 Subaru Impreza [All] and [H4-2.5L], 1996-2002 Subaru Legacy [All], and 2000 Subaru Outback [All]. See the Buyer's Guide tab to confirm your vehicle.

What position does this caliper install in?

This is a front-left caliper and bracket assembly. Verify the correct corner for your vehicle before ordering.

Is this a new or remanufactured caliper?

It is a Raybestos R-Line remanufactured, non-plated caliper rebuilt from an OE core with new seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings.

What is the piston size and caliper type?

It uses a floating caliper design with a 1.677 in (42.6 mm) piston and a cast-iron casting.

Should I replace both sides at once?

Calipers are best serviced as needed per side; replacing both front calipers together can help promote even, balanced braking. Confirm what your service procedure requires.