Raybestos Brakes Disc Brake Caliper P/N:FRC10986
Replace a leaking or sticking front right caliper on a 2000-2005 Ford Excursion, 1999-2004 Ford F-250 Super Duty or 1999-2004 Ford F-350 Super Duty with the Raybestos R-Line FRC10959 Remanufactured Semi-Loaded Caliper and Bracket Assembly. It is a direct-fit replacement for the listed applications on all engines, and each listed application uses one at this position.
Raybestos R-Line non-plated calipers are remanufactured OE units. All rubber and sealing components, such as seals, boots and bleeders, are new. The castings, guide pins and brackets are carefully inspected before they are reused, and each caliper is tested for reliable braking performance.
Specifications: cast iron caliper casting, 2 in (50.8 mm) piston diameter and M10x1 bleeder screw thread. Country of origin: Mexico.
This disc brake caliper is sold individually for the front right position. Replacing both front calipers together is recommended for even, balanced braking. Bleed the brake system after installation as directed by the vehicle service information.
Interchange: 18-B4688 · 18-B4790 · 99-17729A · 99-17873A · 18-P4688 · 18-P4790 · 141.65039 · 142.65039 · 99-18044A · 14-3219
18B4688 · 18B4790 · 9917729A · 9917873A · 18P4688 · 18P4790 · 14165039 · 14265039 · 9918044A · 143219 · SC1328 · SC1384 · BRC291RM
This part cross-references / interchanges with the following part numbers:
Is this 1999-2004 Ford F-250 Super Duty brake caliper for the left or right side?
It is cataloged for the front right position, including on the 1999-2004 Ford F-250 Super Duty. The front left wheel uses its own caliper, which is sold separately.
Should I replace 2000-2005 Ford Excursion calipers in pairs?
This caliper is sold individually for the front right wheel of the 2000-2005 Ford Excursion. Replacing both front calipers together is recommended for even, balanced braking.
What is included with this semi-loaded caliper?
It is a semi-loaded caliper and bracket assembly, so the remanufactured caliper comes with its bracket. During remanufacturing, the seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings are replaced with new parts.
What are the caliper's key specifications?
It has a cast iron casting, a 2 in (50.8 mm) piston and an M10x1 bleeder screw thread. The country of origin is Mexico.
What are signs a brake caliper may need replacing?
Signs include brake fluid leaking at the caliper, a pull to one side when braking, uneven pad wear or a dragging brake. Confirm the cause first, and bleed the brakes after installing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.