Raybestos Brakes Disc Brake Caliper P/N:FRC10986
Replace a leaking or seized front-left caliper with the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper (FRC10184), a direct-fit Ram 2500 brake caliper that installs on the 1994-1999 Dodge Ram 2500 and many other heavy-duty trucks and vans. It clamps the brake pads against the rotor to convert pedal pressure into stopping force, and is remanufactured from an OE core with all-new rubber and sealing components for leak-free operation.
It carries a single 3.380 in (85.852 mm) piston, an M10x1.00 bleeder screw thread, and a coated cast-iron casting. Signs a caliper may need replacing include fluid seeping at the caliper, a wheel that drags or runs hot, uneven pad wear, or the vehicle pulling to one side — diagnose the cause before replacing. Sold individually as the front-left unit; for even, balanced braking, replacing the caliper on both sides as a pair is good practice. Country of origin: Mexico.
Also fits the 2001-2002 Chevrolet Express 2500, 1996-2002 Chevrolet Express 3500, 1990-2000 Chevrolet C35, C3500, and K3500, 1994-1999 Dodge Ram 3500, 1996-1998 Dodge Ram 3500 Van, 1995-1999 Dodge Ram 4000, 2001-2002 GMC Savana 2500 (including V8-6.5L), 1996-2002 GMC Savana 3500, and 1990-2000 GMC C3500 and K3500 — see the Buyer's Guide tab for the full list.
Will this caliper fit a 1994-1999 Dodge Ram 2500?
Yes. FRC10184 is cataloged as the front-left disc brake caliper for the 1994-1999 Dodge Ram 2500, and it fits many other full-size trucks and vans — check the Buyer's Guide tab for your exact vehicle.
Which position is this caliper for?
It is the front-left (driver's side) caliper. It is sold individually; for even, balanced braking, replacing the caliper on both sides as a matched pair is good practice.
Is this caliper new or remanufactured?
It is remanufactured from an OE core. The rubber and sealing components — seals, boots, and bleeder screws — are new, and every unit is 100% pressure tested.
What new components come installed on this caliper?
New seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings are installed to help ensure leak-free operation. Silicone boots are used on heavy-duty applications where applicable.
What are signs my brake caliper may need replacing?
Fluid leaking at the caliper, a wheel that drags or runs hot, uneven brake pad wear, or the vehicle pulling to one side. Have the cause diagnosed first, since these can have other causes.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.