Delphi HP10202 fuel pump hanger for the 1986-1989 Honda Accord 4-cylinder 2.0L and other vehicles supports the fuel pump assembly inside the fuel tank.
- Delphi fuel pumps are designed to operate under extreme temperatures with quick engine starts
- Metal tubes are routed so they do not contact the tank at any point, which removes noise and vibration during driving
- Designed to restore fast pressure performance and system integrity using less energy
- Part is validated and tested
- Lower amperage draw puts less load on the vehicle's electrical system
Quick facts
- Part: Delphi HP10202 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: 1986-1989 Honda Accord 4-cylinder 2.0L and other vehicles
- Condition: New
A clogged fuel filter, a weak relay or damaged wiring can be behind a hard start, stalling or a whine from the tank, so find the cause before buying. If the hanger turns out to be at fault, this one replaces it.
Fits
This hanger is a direct-fit replacement for the 1986-1989 Honda Accord 4-cylinder 2.0L and the 1988-1990 Honda Prelude 4-cylinder 2.0L, matched to the right vehicle application. Each of them takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Engine: 4-cylinder 2.0L
Build and materials
- Construction: hanger assembly without float arm
- Condition: New
In the box
One fuel pump hanger without a float arm, and one instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the hanger.
- Use the instruction sheet in the box for the steps.
Interchange: 951-0010 · 17708-SE0-013 · 17708-SE0-020 · 17708-SF1-A06 · 17708-SF1-S07
4017066 · 4017262 · 4017264 · E8269H · E8371 · DHP10202 · 67824 · 69549 · P72190 · P77008H · AFS1027P · RE0405F · A20015 · E16061 · B0113H · SP1179 · SP8269H · USEP8269H
This part cross-references / interchanges with the following part numbers:
4017066, 4017262, 4017264, E8269H, E8371, DHP10202, 67824, 69549, P72190, P77008H, 951-0010, AFS1027P, RE0405F, 17708-SE0-013, 17708-SE0-020, 17708-SF1-A06, 17708-SF1-S07, A20015, E16061, B0113H, SP1179, SP8269H, USEP8269H
Frequently Asked Questions
Does the Delphi HP10202 fit a 1988-1990 Honda Prelude 4-cylinder 2.0L?
Yes. Delphi HP10202 fits the 1988-1990 Honda Prelude 4-cylinder 2.0L, and each Prelude takes one.
Does this fuel pump hanger assembly come with the float arm?
No. The Delphi HP10202 comes without a float arm. The box holds the hanger and one instruction sheet.
Do the metal tubes on this hanger rub against the fuel tank?
No. The tubes are routed so they do not contact the tank at any point, which removes noise and vibration while the vehicle is running.
Should I clean the fuel tank before installing the HP10202 hanger?
Yes. Check and clean the tank first. An instruction sheet comes with the Delphi HP10202.
Is Delphi HP10202 a replacement for number 17708-SE0-013?
Yes. 17708-SE0-013 is one of the numbers this Delphi HP10202 hanger replaces. The rest are on the Interchange line.
