Delphi HP10212 fuel pump and sender assembly for the 1989-1991 Ford E-350 Econoline 6-cylinder 4.9L, V8 5.8L or 7.5L and other vehicles moves fuel from the tank toward the engine and carries the float that reads fuel level. This Delphi fuel pump, also listed as a fuel pump hanger assembly, puts the pump, float arm and metal tubes on one hanger.
- Delphi pump designed to operate under extreme temperatures with quick engine starts
- Metal tubes routed so they never touch the tank, which removes noise and vibration in operation
- Empty float height and float retention set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Designed to restore fast pressure performance and system integrity with less energy
Quick facts
- Part: Delphi HP10212 fuel pump and sender assembly
- Fits: 1989-1991 Ford E-350 Econoline 6-cylinder 4.9L, V8 5.8L or 7.5L and other vehicles
- Condition: New
Hard starting, stalling or an inaccurate gas gauge can mean the pump or float arm is worn. These signs alone do not prove the pump is at fault; a restricted fuel filter is another common source.
Fits
Delphi HP10212 fits the 1989-1991 Ford E-350 Econoline 6-cylinder 4.9L, V8 5.8L or 7.5L and the 1989 Ford E-350 Econoline Club Wagon 6-cylinder 4.9L, V8 5.8L or 7.5L. Either vehicle takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Engines: L6-4.9L, V8-5.8L, V8-7.5L
Build and materials
- Type: Hanger assembly with float arm
- Condition: New
In the box
One fuel pump and sender assembly with float arm, one seal, two retainer clips and one instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the assembly.
- The instruction sheet in the box covers the steps.
Interchange: 951-3000 · 953-4143 · 953-4169 · F1UZ 9H307-B · F1UZ 9H307-BA · PFS-28
4011035 · 4017037 · E2000 · E2071S · DHP10212 · 67005 · 69100 · P74597S · AFS0123S · RE0123S · C0002H · A30127 · SP2013H · USEP2071S
This part cross-references / interchanges with the following part numbers:
4011035, 4017037, E2000, E2071S, DHP10212, 67005, 69100, P74597S, 951-3000, 953-4143, 953-4169, AFS0123S, RE0123S, F1UZ 9H307-B, F1UZ 9H307-BA, PFS-28, C0002H, A30127, SP2013H, USEP2071S
Frequently Asked Questions
Is this the fuel pump for a 1989-1991 Ford E-350 Econoline 6-cylinder 4.9L, V8 5.8L or 7.5L?
Yes. Delphi HP10212 fits the 1989-1991 Ford E-350 Econoline and the 1989 Ford E-350 Econoline Club Wagon, each with the 6-cylinder 4.9L, V8 5.8L or 7.5L.
Which parts come with this Delphi fuel pump assembly?
The Delphi HP10212 box holds the hanger assembly with float arm, a seal, two retainer clips and an instruction sheet.
Will the float on this fuel pump and sender assembly read the gas gauge correctly?
Yes. The empty float height and float retention match OE specifications, which is intended to give a correct gas gauge reading.
How can I tell a Delphi fuel pump replacement is due?
A noisy pump, hard starting or a gauge that sticks can mean the pump or float is worn.
Does the fuel tank need cleaning before this assembly goes in?
Yes. Check and clean the fuel tank before installing the new assembly, and follow the instruction sheet that comes with it.
