Lower Coolant Bypass Hose for 1996-1999 Chevrolet Tahoe & More - Gates 22210

$12.99

Vehicles this part fits

    Part number: 22210
    UPC: 072053186161
    Condition: New
    Weight: 0.17 LBS
    Item Package Quantity: 1
    $12.99
    Adding to cart… The item has been added

    Have questions?

    Gates Engine Coolant Bypass Hose P/N:22210
    Gates Engine Coolant Bypass Hose P/N:22210
    $12.99
    $12.99

    Gates 22210 coolant bypass hose for the 1996-1999 Chevrolet Tahoe V8 6.5L and other vehicles carries engine coolant between its two connections as a pre-shaped, molded EPDM hose.

    • Specifically engineered materials resist collapse under vacuum
    • Hose construction resists electrochemical degradation, the leading cause of hose failure
    • Pre-shaped for a tight seal at the connections
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets the requirements of SAE 20R4 class D2 and DIN 73411 class A, except for tolerances
    • Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)

    Quick facts

    • Part: Gates 22210 coolant bypass hose
    • Also called: engine coolant bypass hose
    • Fits: the 1996-1999 Chevrolet Tahoe V8 6.5L and other vehicles
    • Material: EPDM
    • Condition: New

    A hose that has gone soft, cracked or started to weep coolant can be due for replacement. Loose clamps, the thermostat housing or a radiator connection can leak in similar ways, so find the cause before buying, and look only with the engine off and cool.

    Fits

    This hose is listed for a wide range of Chevrolet, GMC, Hummer and Workhorse models, including the 1996-1998 Chevrolet C1500 V8 6.5L and the 1996-1998 Chevrolet K1500 V8 6.5L. The 1996-1999 Chevrolet Tahoe V8 6.5L takes one. Owners of other models can look up their year and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Centerline length: 5.5 in (140 mm)
    • End 1 inside diameter: 1 in (25 mm)
    • End 2 inside diameter: 1 in (25 mm)

    Build and materials

    • Construction: molded, no spring
    • Material: EPDM tube, synthetic fiber knit reinforcement, EPDM cover
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Use for coolant only; not for fuel or oil transfer.

    Interchange: KM-4421
    20290S · 05744460 · 5744460 · 72060 · B72060 · 10243629 · 64156 · 8852

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    20290S, 05744460, 5744460, 22210, 72060, B72060, 10243629, 64156, KM-4421, 8852

    Frequently Asked Questions

    Will the Gates 22210 hose fit a 1996-1999 Chevrolet Tahoe V8 6.5L?

    Yes. Gates 22210 is listed for the 1996-1999 Chevrolet Tahoe V8 6.5L, the 1996-1998 Chevrolet C1500 V8 6.5L and the 1996-1998 Chevrolet K1500 V8 6.5L. For another model, look up your year and engine in the "Vehicles it fits" section.

    What are the inside diameter and length of this coolant hose?

    Gates 22210 has a 1 in (25 mm) inside diameter at both ends, and its centerline length is 5.5 in (140 mm).

    What is this hose made of, and what temperatures can it handle?

    This hose has an EPDM tube, synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover. Its temperature range is -40 °F to +257 °F (-40 °C to +125 °C).

    Can this engine coolant bypass hose carry fuel or oil?

    No. This molded hose is for coolant only and is not meant for fuel or oil transfer.

    Should I replace the hose clamps when I install this hose?

    Yes. Replace the hose clamps each time a new coolant hose is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review