Heater Hose for 2003-2007 Honda Accord & More - Gates 19553

$8.99

Vehicles this part fits

    Part number: 19553
    UPC: 770075427469
    Condition: New
    Weight: 0.09 LBS
    Item Package Quantity: 1
    $8.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19553
    Gates HVAC Heater Hose P/N:19553
    $8.99
    $8.99

    Gates 19553 heater hose for the 2003-2007 Honda Accord 4-cylinder 2.4L or V6 3.0L and other vehicles carries coolant between the heater control valve and the heater inlet. This Gates molded heater hose is similar to OEM specifications.

    • Factory-molded to fit today's smaller, tighter-fitting engine compartments
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
    • Used for coolant, water and air applications, and also approved for marine applications

    Quick facts

    • Part: Gates 19553 heater hose
    • Also called: HVAC heater hose
    • Fits: 2003-2007 Honda Accord 4-cylinder 2.4L or V6 3.0L and other vehicles
    • Position: Heater control valve to heater inlet
    • Material: EPDM
    • Condition: New

    A hose that is cracked, swollen or seeping can show up as coolant loss, a coolant smell or weak cabin heat. Those signs alone do not prove the hose is at fault, since a clogged heater core can also leave the cabin cold. Each car takes a single hose between the heater control valve and the heater inlet.

    Fits

    The fitment covers a wide range of Honda and Acura models, including the 2005-2008 Acura RL V6 3.5L and the 2009-2012 RL V6 3.7L, plus the 2005-2008 Acura TL V6 3.2L and the 2007-2008 TL V6 3.5L.

    Specifications

    Fit and size

    • Position: heater control valve to heater inlet
    • Quantity per vehicle: 1
    • Inside diameter, both ends: 16 mm (.63 in)
    • Centerline length: 127 mm (5 in)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use for fuel or oil transfer applications.

    Interchange: 14526S · 64468 · A91105 · 79722SDAA00 · 11553

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14526S, 19553, 64468, A91105, 79722SDAA00, 11553

    Frequently Asked Questions

    Is this Accord heater hose right for the 2003-2007 Honda Accord 4-cylinder 2.4L or V6 3.0L?

    Yes, Gates 19553 fits the 2003-2007 Honda Accord 4-cylinder 2.4L or V6 3.0L. If your car is another model, look up its year and engine in the "Vehicles it fits" section.

    What size is the Gates 19553 HVAC heater hose?

    Gates 19553 has a 16 mm (.63 in) inside diameter at both ends and a centerline length of 127 mm (5 in). It is a molded hose with no branches.

    Can this Gates heater hose carry fuel or oil?

    No. This hose is not for fuel or oil transfer. It is meant for coolant, water and air applications, and is also approved for marine applications.

    Do I need new hose clamps with the 19553 heater hose?

    Fresh clamps are advised every time a new coolant hose goes on, so plan on replacing the old ones when you install this hose.

    How can I check a heater hose between the control valve and heater inlet for wear?

    With the engine off and cool, look for cracks, bulging, soft spots or coolant residue at the hose and its ends. A shop can pressure-test the cooling system if you are unsure.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review