Clutch Flywheel for 2005-2006 Volkswagen Jetta & More - LuK DMF072

$510.99

Vehicles this part fits

    Part number: DMF072
    UPC: 670774181948
    Condition: New
    Weight: 23.71 LBS
    Item Package Quantity: 1
    $510.99
    Adding to cart… The item has been added

    Have questions?

    LuK Clutch Flywheel P/N:DMF072
    LuK Clutch Flywheel P/N:DMF072
    $510.99
    $510.99

    LuK DMF072 clutch flywheel for the 2005-2006 Volkswagen Jetta 4-cylinder 1.9L and other vehicles damps engine torsional vibrations with a dual mass design. Two masses rotate against each other, and integrated arc springs absorb the engine's torsional vibrations almost completely.

    • Dampens torsional vibrations in all speed ranges for driver and passenger comfort
    • Absorbs engine vibrations and torque spikes to help prevent gearbox damage
    • Reduces bending stress on the engine crankshaft
    • Reduces vibration reaching the clutch pedal
    • Matched to each vehicle for low-speed driving, with lower fuel consumption and emissions

    Quick facts

    • Part: LuK DMF072 clutch flywheel
    • Fits: 2005-2006 Volkswagen Jetta 4-cylinder 1.9L and other vehicles

    A worn dual mass flywheel can show up as rattle at idle, vibration through the clutch pedal or a shudder when pulling away. Before you replace the flywheel, rule out the clutch disc, pressure plate and release bearing as the source of the noise or vibration. This listing is one flywheel, and the 2005-2006 Volkswagen Jetta 4-cylinder 1.9L takes one.

    Fits

    This flywheel fits the 2005-2006 Volkswagen Jetta 4-cylinder 1.9L and the 2008 Volkswagen Bora 5-cylinder 2.5L.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Outside diameter: 282.935 mm (11.139 in)
    • Overall casting O.D.: 281.6 mm (11.087 in)
    • Friction surface outer diameter: 230.8 mm (9.087 in)
    • Friction surface inner diameter: 133 mm (5.236 in)
    • Ring gear mounting O.D.: 257.85 mm (10.152 in)
    • Pilot I.D.: 32 mm (1.260 in)
    • Crankshaft register diameter: 10.5 mm (.413 in)
    • Centering diameter / dowel hole: 240.1 mm (9.453 in)
    • Dowel hole diameter: 5 mm (.197 in)
    • Crankshaft bolt hole PCD: 66 mm (2.598 in)
    • Clutch pressure plate bolt hole PCD: 240.1 mm (9.453 in)
    • Flywheel thickness: 65.71 mm (2.587 in)
    • Ring gear thickness: 10 mm (.394 in)
    • Ring gear teeth: 132

    Build and materials

    • Type: dual mass flywheel
    • Ring gear number: L-09180-0165-06
    • Country of origin: Germany

    Interchange: 03G 105 266 BA · 059 105 266 E · 059 105 266 T
    4150250110

    This part cross-references / interchanges with the following part numbers:

    4150250110, 03G 105 266 BA, 059 105 266 E, 059 105 266 T

    Frequently Asked Questions

    Does the LuK DMF072 fit the 2008 Volkswagen Bora 5-cylinder 2.5L?

    Yes. LuK DMF072 is listed for the 2008 Volkswagen Bora 5-cylinder 2.5L, and that car takes one flywheel.

    What size is the friction surface on this dual mass flywheel?

    The friction surface measures 230.8 mm (9.087 in) outside and 133 mm (5.236 in) inside. The pilot I.D. is 32 mm (1.260 in).

    How many teeth does the ring gear on the LuK DMF072 have?

    The LuK DMF072 ring gear has 132 teeth and is 10 mm thick. Its ring gear number is L-09180-0165-06.

    How does a dual mass flywheel keep vibration away from the clutch pedal?

    The two masses rotate against each other, and arc springs built into the flywheel absorb engine torsional vibrations. Less of that vibration goes to the clutch pedal.

    Does the LuK DMF072 replace number 059 105 266 E?

    Yes. LuK DMF072 is listed as a replacement for 059 105 266 E, one of the numbers on this page's Interchange line.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review