LuK DMF100 clutch flywheel for the 2013-2019 Nissan Sentra 4-cylinder 1.8L and other vehicles damps torsional vibrations in the powertrain. Unlike a conventional flywheel, this dual mass flywheel (DMF) has two masses mounted to rotate against each other.
- Integrated arc springs absorb the engine's torsional vibrations almost completely
- Absorbs engine vibrations and torque spikes to protect the gearbox
- Less bending stress on the engine's crankshaft
- Less vibration reaching the clutch pedal
- Dampens torsional vibrations in the powertrain for driver and passenger comfort
- Matched to each vehicle to allow low-speed driving with lower fuel consumption and emissions
Quick facts
- Part: LuK DMF100 clutch flywheel
- Fits: 2013-2019 Nissan Sentra 4-cylinder 1.8L and other vehicles
- Condition: New
A rattle at idle, vibration through the clutch pedal or a shudder when pulling away can mean the flywheel is wearing. Before you replace the flywheel, rule out the clutch disc, pressure plate and release bearing, because noise or pedal vibration can start in those parts too.
Fits
It fits the 2013-2019 Nissan Sentra 4-cylinder 1.8L, the 2007-2011 Sentra 4-cylinder 2.0L, the 2007-2012 Nissan Versa 4-cylinder 1.8L and the 2009-2014 Nissan Cube 4-cylinder 1.8L. This listing is one flywheel, and the 2009-2014 Nissan Cube 4-cylinder 1.8L takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 287.871 mm (11.334 in)
- Overall casting O.D.: 292.8 mm (11.528 in)
- Friction surface outer diameter: 230 mm (9.055 in)
- Friction surface inner diameter: 157 mm (6.181 in)
- Ring gear mounting O.D.: 263.67 mm (10.381 in)
- Pilot I.D.: 32.2 mm (1.268 in)
- Crankshaft register diameter: 11.2 mm (0.441 in)
- Centering diameter / dowel hole: 255 mm (10.039 in)
- Dowel hole diameter: 6 mm (0.236 in)
- Bolt hole PCD, crankshaft: 66 mm (2.598 in)
- Bolt hole PCD, clutch pressure plate: 255 mm (10.039 in)
- Flywheel thickness: 57.1 mm (2.248 in)
- Ring gear thickness: 10.2 mm (0.402 in)
- Ring gear teeth: 136
Build and materials
- Type: dual mass design with arc spring damping
- Dowel pins: included
- Ring gear number: L-09180-0206-01
- Condition: New
- Country of origin: China
In the box
One clutch flywheel with dowel pins.
Interchange: FDN-912 · 12310-ET000 · 12310-ET00A · 12310-ET01C · 12310-ET02C · 12 30 015 47R · 77 01 066 221 · 2294 501 187
4150409100 · 836566
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
FDN-912, 4150409100, 12310-ET000, 12310-ET00A, 12310-ET01C, 12310-ET02C, 12 30 015 47R, 12 31 0ET 00A, 77 01 066 221, 2294 501 187, 836566
Frequently Asked Questions
Does the LuK DMF100 clutch flywheel also fit the 2007-2011 Nissan Sentra 4-cylinder 2.0L?
Yes. The LuK DMF100 is listed for the 2007-2011 Nissan Sentra 4-cylinder 2.0L as well as the 2013-2019 Sentra 4-cylinder 1.8L, and each takes one flywheel.
Does this clutch flywheel come with dowel pins?
Yes. This flywheel comes with dowel pins. The listing is one flywheel; the clutch disc and pressure plate are not part of it.
What are the friction surface diameters on the LuK DMF100 flywheel?
The LuK DMF100 friction surface is 230 mm (9.055 in) outer diameter and 157 mm (6.181 in) inner diameter. The ring gear has 136 teeth.
How can I tell if a clutch flywheel is wearing out?
Watch for a rattle at idle, vibration through the clutch pedal or a shudder when pulling away. A shop can test the flywheel to confirm the cause.
What do the arc springs in the LuK DMF100 clutch flywheel do?
The two masses rotate against each other, and the integrated arc springs absorb engine torsional vibrations almost completely. This means less bending stress on the crankshaft and less vibration at the clutch pedal.
