LuK LFW244 clutch flywheel for the 1998-2008 Toyota Corolla 4-cylinder 1.8L and other vehicles gives the clutch a smooth, flat friction surface to work against. It is a new rigid flywheel, offered as an alternative to resurfacing.
- Dynamically balanced to eliminate vibration and increase clutch performance
- Ring gear with 106 teeth is part of the flywheel
- Dowel pins fitted to the flywheel
- Engineering and materials aimed at longer service life for the flywheel and clutch system
Quick facts
- Part: LuK LFW244 clutch flywheel
- Fits: 1998-2008 Toyota Corolla 4-cylinder 1.8L and other vehicles
- Condition: New
A worn flywheel can show up as vibration or clutch chatter, and a worn clutch can feel much the same. With the clutch apart and the engine off, look over the friction surface for cracks, grooves or heat spots, and pin down the cause before replacing the flywheel.
Fits
This clutch flywheel is a direct-fit replacement for the 1998-2008 Toyota Corolla 4-cylinder 1.8L, the 2003-2008 Toyota Matrix 4-cylinder 1.8L and the 2003-2008 Pontiac Vibe 4-cylinder 1.8L. Every component, including the ring gear, is engineered and manufactured to OE specifications.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 271.36 mm (10.683 in)
- Overall casting O.D.: 271.22 mm (10.678 in)
- Friction surface outer diameter: 215 mm (8.465 in)
- Friction surface inner diameter: 134 mm (5.276 in)
- Centering diameter / dowel hole: 250 mm (9.843 in)
- Bolt hole PCD, clutch pressure plate: 250 mm (9.843 in)
- Bolt hole PCD, crankshaft: 59.97 mm (2.361 in)
- Pilot I.D.: 35.9 mm (1.413 in)
- Ring gear mounting O.D.: 247.24 mm (9.734 in)
- Dowel hole diameter: 8 mm (0.315 in)
- Crankshaft register inside diameter: 10.42 mm (0.410 in)
- Flywheel thickness: 33.91 mm (1.335 in)
- Ring gear teeth: 106
Build and materials
- Type: rigid flywheel
- Dowel pins: fitted
- Ring gear chamfer: engine side, left at the 6:00 position
- Condition: New
- Country of origin: Thailand
In the box
One clutch flywheel with dowel pins. A vehicle needs one flywheel, which is what this listing holds.
Interchange: 13405-22020
167134 · 4160049100 · NFW9122
This part cross-references / interchanges with the following part numbers:
167134, 4160049100, NFW9122, 13405-22020
Frequently Asked Questions
Will the LuK LFW244 flywheel fit a 2003-2008 Toyota Matrix 4-cylinder 1.8L?
Yes, LuK LFW244 fits the 2003-2008 Toyota Matrix 4-cylinder 1.8L. If your car is not one named on this page, look it up in the "Vehicles it fits" section.
What are the centering diameter and bolt circles on this LuK clutch flywheel?
The LuK LFW244 has a 250 mm (9.843 in) centering diameter and a 250 mm bolt circle for the clutch pressure plate. The crankshaft bolt circle is 59.97 mm (2.361 in).
Does this LuK flywheel come with the ring gear and dowel pins?
Yes. The ring gear, with 106 teeth, is part of the flywheel, and the dowel pins are fitted. This listing is one flywheel.
What should I look for on the surface of a worn clutch flywheel?
With the clutch apart and the engine off, look for cracks, grooves or heat spots on the friction surface. Vibration or chatter when the clutch engages can also be a sign.
Is the LuK LFW244 flywheel dynamically balanced?
Yes. LuK balances its solid flywheels dynamically, which is intended to eliminate vibration and increase clutch performance.
