LuK LFW251 clutch flywheel for the 2006-2015 Honda Civic 4-cylinder 1.8L gives the clutch a smooth, flat surface to grip. It is a new rigid flywheel, and every component, including the ring gear, is made to OE specifications.
- Smooth, flat friction surface for proper clutch operation, an alternative to resurfacing
- Dynamically balanced to eliminate vibration and increase clutch performance
- Ring gear with 113 teeth and the chamfer on the engine side
- Engineered for a longer service life of the flywheel and clutch system
Quick facts
- Part: LuK LFW251 clutch flywheel
- Fits: 2006-2015 Honda Civic 4-cylinder 1.8L
- Condition: New
A worn or damaged flywheel can show up as clutch chatter, vibration or slipping. With the clutch already out, look the friction face over for cracks, heat spots or deep grooves and measure it against the specs below, since slipping and chatter can also start in the clutch disc or pressure plate.
Fits
This is a direct-fit replacement for the 2006-2015 Honda Civic 4-cylinder 1.8L (engine code L4-1.8L), which takes one flywheel.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 292.17 mm (11.503 in)
- Overall casting O.D.: 273.77 mm (10.778 in)
- Ring gear mounting O.D.: 265.36 mm (10.447 in)
- Friction surface outer diameter: 218 mm (8.583 in)
- Friction surface inner diameter: 148 mm (5.827 in)
- Pilot I.D.: 36.93 mm (1.454 in)
- Crankshaft register diameter: 12.57 mm (0.495 in)
- Centering diameter / dowel hole: 247 mm (9.724 in)
- Crankshaft bolt circle: 63 mm (2.480 in)
- Clutch pressure plate bolt circle: 247 mm (9.724 in)
- Dowel hole diameter: 6 mm (0.236 in)
- Flywheel thickness: 25.5 mm (1.004 in)
Build and materials
- Type: rigid flywheel
- Balancing: dynamically balanced
- Ring gear: 113 teeth, chamfer on the engine side, left at the 6:00 position
- Condition: New
- Country of origin: Thailand
In the box
One clutch flywheel with dowel pins.
Interchange: 22100-RNA-003
167232 · 4160303100 · NFW9139
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
167232, 22100-RNA-003, 4160303100, NFW9139
Frequently Asked Questions
Is the LuK LFW251 clutch flywheel right for a 2006-2015 Honda Civic 4-cylinder 1.8L?
Yes. LuK LFW251 is a direct-fit replacement for the 2006-2015 Honda Civic 4-cylinder 1.8L (L4-1.8L), and the car takes one flywheel.
Does the LuK LFW251 flywheel come with dowel pins?
Yes. The LuK LFW251 clutch flywheel comes with dowel pins.
How many teeth does the ring gear on this flywheel have?
The ring gear has 113 teeth, with its chamfer on the engine side.
What should I look for on a flywheel friction face to know it needs replacing?
With the clutch out, cracks, heat spots or deep grooves on the friction face, or chipped ring gear teeth, can mean the flywheel needs replacing. A shop can compare it with the listed specs.
Can I use a new flywheel instead of resurfacing my old one?
Yes. LuK LFW251 is a new flywheel with a smooth, flat surface, offered as an alternative to resurfacing, and it is dynamically balanced.
