LuK LFW473 clutch flywheel for the 2008-2012 Honda Accord 4-cylinder 2.4L and other vehicles gives the clutch disc a smooth, flat surface to grip. This rigid flywheel is new and includes its ring gear.
- Rigid flywheel with a smooth, flat friction surface for proper clutch operation
- Dynamically balanced to eliminate vibration and increase clutch performance
- 119-tooth ring gear with the chamfer on the engine side
- Engineering and quality materials that add to the service life of the flywheel and clutch system
- A new flywheel to pair with a clutch set, as an alternative to resurfacing the old one
Quick facts
- Part: LuK LFW473 clutch flywheel
- Fits: 2008-2012 Honda Accord 4-cylinder 2.4L and other vehicles
- Condition: New
A shudder as the clutch engages, vibration through the pedal or floor, or a scored, heat-marked friction surface can mean the flywheel is worn. Before you replace it, rule out the clutch disc, pressure plate, release bearing and clutch hydraulics, because any of them can also produce a shudder or slip.
Fits
This flywheel fits the 2008-2012 Honda Accord 4-cylinder 2.4L and the 2009-2014 Acura TSX 4-cylinder 2.4L, and either car needs one. The flywheel, ring gear included, is engineered and manufactured to Original Equipment (OE) specifications.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 306.5 mm (12.067 in)
- Overall casting O.D.: 281.8 mm (11.094 in)
- Ring gear mounting O.D.: 275.5 mm (10.846 in)
- Friction surface outer diameter: 230 mm (9.055 in)
- Friction surface inner diameter: 147 mm (5.787 in)
- Centering diameter / dowel hole: 254 mm (10.000 in)
- Pilot I.D.: 37.35 mm (1.470 in)
- Crankshaft register diameter: 12.5 mm (0.492 in)
- Dowel hole diameter: 6 mm (0.236 in)
- Bolt circle, crankshaft: 63 mm (2.480 in)
- Bolt circle, clutch pressure plate: 254 mm (10.000 in)
- Flywheel thickness: 24.6 mm (0.969 in)
- Ring gear thickness: 9.15 mm (0.360 in)
- Ring gear teeth: 119
Build and materials
- Type: rigid flywheel
- Balancing: dynamically balanced
- Dowel pins: with dowel pins
- Ring gear chamfer: engine side, left at 6:00 o'clock
- Condition: New
- Country of origin: Thailand
In the box
One clutch flywheel with dowel pins.
Interchange: 22100-R40-003
4160310100
This part cross-references / interchanges with the following part numbers:
22100-R40-003, 4160310100
Frequently Asked Questions
Is the LuK LFW473 a clutch flywheel for the 2008-2012 Honda Accord 4-cylinder 2.4L?
Yes. LuK LFW473 is listed for the 2008-2012 Honda Accord 4-cylinder 2.4L, and the car takes one flywheel.
Does the LuK LFW473 flywheel come with dowel pins?
Yes. LuK LFW473 comes with dowel pins, and the ring gear is part of the flywheel.
How many teeth does the ring gear on this flywheel have?
The ring gear has 119 teeth. Its chamfer is on the engine side and sits at the left at the 6:00 o'clock position, matching OE.
Can a scored or heat-marked flywheel cause clutch shudder?
Yes, it can. A scored or heat-marked friction surface can cause a shudder as the clutch engages, and a shop can inspect the flywheel face when the clutch is removed.
Does the LuK LFW473 clutch flywheel replace part number 22100-R40-003?
Yes. 22100-R40-003 is one of the numbers LuK LFW473 replaces; 4160310100 is the other.
