Mevotech TTX CTXMS401186 front left lower control arm with ball joint for the 2013-2019 Ford Taurus and other vehicles links the front left wheel to the body. This Mevotech TTX control arm, a control arm and ball joint assembly, comes with bushings, a ball joint and a dust boot.
- Mevotech TTX line, built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks
- Patented sintered metal bearings for longer-lasting performance
- Double-bonded rubber bushings for increased stiffness and durability
- Integri-Boot design built into the ball joint assembly to lock out moisture and contaminants
- 180 degree SAE grease fitting for servicing the greaseable ball joint
- Repel-TEK surface treatment to prevent rust build-up
Quick facts
- Part: Mevotech TTX CTXMS401186 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2013-2019 Ford Taurus and other vehicles
- Position: Front left lower
- Material: Steel
- Condition: New
A clunk over bumps, wandering steering or uneven tire wear can mean this arm or its ball joint is worn, though a tie rod end or a sway bar link can be behind the same signs. The front arms are normally replaced together, but this listing is one arm for the front left; the front right is a separate part, and the 2013-2019 Ford Taurus takes one per side.
Fits
Mevotech TTX makes this control arm with ball joint for the 2013-2019 Ford Taurus, the 2013-2019 Ford Police Interceptor Sedan, the 2014-2018 Ford Special Service Police Sedan and other vehicles.
Specifications
Fit and size
- Position: Front left lower
- Quantity per application: 1
- Control arm maximum width: 17.6 in
- Control arm maximum length: 15.4 in
- Ball joint stud type: Threaded
Build and materials
- Control arm material: Steel
- Bushing material: Rubber
- Bearing material: Sintered metal
- Dust boot material: Neoprene
- Pre-greased and greaseable
- Condition: New
- Country of origin: China
In the box
One front left lower control arm with ball joint, with bushings, dust boot, a 180 degree SAE grease fitting, a part-specific nylon locking nut and mounting hardware.
Installation notes
- Comes pre-greased.
- Labor Saver designs, tools and hardware are meant to make installation faster and easier.
Interchange: 810-503806B · 622.61028 · 528-353
19474597 · CA3826 · DA5Z3079A · DA5Z3079B · DA5Z3079C · DA5Z3079D · DA5Z3079E · DA5Z3C403A · FA5Z3079A · FA5Z3079B · MCF2394 · MCF2396 · RK622916 · X15CJ0836 · JTC2838
This part cross-references / interchanges with the following part numbers:
19474597, 810-503806B, 622.61028, 528-353, CA3826, DA5Z3079A, DA5Z3079B, DA5Z3079C, DA5Z3079D, DA5Z3079E, DA5Z3C403A, FA5Z3079A, FA5Z3079B, MCF2394, MCF2396, RK622916, CTXMS401186, X15CJ0836, JTC2838
Frequently Asked Questions
Is this a suspension control arm for the 2013-2019 Ford Taurus?
Yes, Mevotech TTX CTXMS401186 fits the 2013-2019 Ford Taurus on the front left side. If your car is a different model, look it up in the "Vehicles it fits" section.
Is this arm the right one for the front left of a 2013-2019 Ford Police Interceptor Sedan?
Yes. This front left lower control arm with ball joint fits the 2013-2019 Ford Police Interceptor Sedan, and the front right side is a separate part.
Does this control arm come with a grease fitting and locking nut?
Yes. Mevotech TTX CTXMS401186 includes bushings, a ball joint, a dust boot, a 180 degree SAE grease fitting, a part-specific nylon locking nut and mounting hardware.
What are the bushings and bearing made of on this control arm?
The bushings are rubber and the bearing is sintered metal. The dust boot is neoprene and the control arm itself is steel.
Is DA5Z3079A an interchange number for this control arm?
Yes. DA5Z3079A is one of the numbers Mevotech TTX CTXMS401186 replaces, along with 810-503806B, 528-353 and the others on the Interchange line.
