MOOG RK622945 front left lower control arm with ball joint for the 2008-2019 Toyota Highlander and other vehicles links the front left wheel to the vehicle and lets the suspension move. This MOOG control arm and ball joint assembly comes with the ball joint and bushings already installed.
- Induction-hardened studs with a patent-pending carbon fiber-reinforced bearing for longer socket life
- Rubber bushings built for quiet operation and resistance to wear, salt, road grime and oils
- Sealed ball joint sockets for maintenance-free operation
- Heat treated to inhibit premature failure
- E-coated arm and coated studs to inhibit premature deterioration
Quick facts
- Part: MOOG RK622945 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2008-2019 Toyota Highlander and other vehicles
- Position: Front left lower
- Material: Stamped steel arm, rubber bushings
- Condition: New
A clunk over bumps, uneven tire wear or a loose feel in the steering can come from a worn ball joint or bushing. Before you replace the arm, rule out a worn stabilizer link, strut or tie rod end, which can make similar noises.
Fits
The 2008-2019 Toyota Highlander, the 2010-2022 Lexus RX350 and the 2018-2022 Lexus RX350L take this MOOG lower control arm, along with many other vehicles, and it is a direct-fit replacement for each. Open the "Vehicles it fits" section to check your exact model and engine. The front axle takes one arm on each side; this listing is one MOOG front lower control arm for the left, the right is a separate part, and the other side of the axle is normally done at the same time.
Specifications
Fit and size
- Position: Front left lower
- Quantity per vehicle: 1 for this side
- Ball joint mounting type: Press in
- Ball joint stud type: Threaded
- Adjustable: No
Build and materials
- Includes ball joint and bushings
- Control arm material: Stamped steel
- Bushing material: Rubber
- Condition: New
- Country of origin: China
In the box
One control arm, with the ball joint and bushings. A grease fitting is not included.
Installation notes
- All necessary hardware comes with the arm.
- Precision tolerances for easy installation and steering alignment.
Interchange: 102-7771 · 810-690361B · 524-087 · 526-045 · 526-419
62244040 · TC7568 · CA74443PR · CB75363PR · CA14619 · 5CB86262 · CMS861028 · MS861028 · 2608180 · JTC3123 · 4334009140 · 480690E050 · 480690E060 · 480690T010 · 480690T011 · 4806948040 · 4806948041 · 4806948070
This part cross-references / interchanges with the following part numbers:
102-7771, 810-690361B, 62244040, TC7568, 524087, 524-087, 526-045, 526-419, CA74443PR, CB75363PR, CA14619, 5CB86262, CMS861028, MS861028, 2608180, JTC3123, 4334009140, 480690E050, 480690E060, 480690T010, 480690T011, 4806948040, 4806948041, 4806948070
Frequently Asked Questions
Does the MOOG RK622945 lower control arm fit the 2010-2022 Lexus RX350?
Yes. MOOG RK622945 is the front left lower arm for the 2010-2022 Lexus RX350, and it also fits the 2008-2019 Toyota Highlander. The "Vehicles it fits" section covers other models.
Is the MOOG lower control arm bushing already installed in RK622945?
Yes. MOOG RK622945 comes with the bushings and the ball joint installed, and the necessary hardware is included. A grease fitting is not included.
What material is the MOOG control arm bushing on this arm made of?
The bushings are rubber, built for quiet operation and resistance to wear, salt, road grime and oils. The control arm itself is stamped steel.
What is the carbon fiber bearing in this ball joint?
It is a patent-pending carbon fiber-reinforced bearing paired with induction-hardened studs. It reduces socket friction for longer socket life.
Is 4806948040 an interchange number for this control arm?
Yes. 4806948040 is listed as an interchange number for MOOG RK622945, along with the other numbers on the Interchange line.
