Nugeon 99-17918A rear right brake caliper for the 2004-2007 Ford Freestar and other vehicles clamps the brake pads against the rotor to slow the wheel. This is a remanufactured floating caliper, also sold as a disc brake caliper.
- Floating design with a single steel piston, 46 mm (1.811 in) across
- Cast iron caliper housing with a rust-preventative finish
- Bracket, caliper slides, dust boots and caliper and pad hardware included
- Bleeder screw with cap and crush washers included
Quick facts
- Part: Nugeon 99-17918A brake caliper
- Also called: disc brake caliper
- Fits: 2004-2007 Ford Freestar and other vehicles
- Position: Rear right
- Material: Cast iron housing, steel piston
- Condition: Remanufactured
Fluid around the piston boot, a pull to one side under braking or unevenly worn pads can mean a caliper is failing. Worn rotors, a collapsed brake hose or glazed pads can be behind those signs too, so find the cause before buying.
Fits
As a 2004-2007 Ford Freestar brake caliper, it also fits the 2004-2007 Mercury Monterey. The rear axle takes one caliper on each side. This listing is a single caliper for the right, the left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1 for this side
- Piston diameter: 46 mm (1.811 in)
- Piston quantity: 1
- Inlet fitting: banjo bolt, thread M10 - 1.5
- Bleeder screw thread: M10-1.0
- Housing cast number: 0358-0
Build and materials
- Caliper type: Floating
- Housing material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One brake caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw with cap and crush washers. Brake pads, anti-squeal shims, wear sensors and the bracket and caliper mounting bolts are not included, so plan on new bolts.
Interchange / FMSI:
FMSI: D1021
Frequently Asked Questions
Is this a rear brake caliper for the 2004-2007 Ford Freestar?
Yes, Nugeon 99-17918A is the rear right brake caliper for the 2004-2007 Ford Freestar and also fits the 2004-2007 Mercury Monterey; the left side is a separate part.
What comes with the Nugeon caliper?
Nugeon 99-17918A comes with its bracket, slides, dust boots, hardware, bleeder screw with cap and crush washers. Pads, shims, wear sensors and mounting bolts are not included.
Is this Nugeon brake caliper remanufactured?
Yes. It is a remanufactured floating caliper with a cast iron housing and one 46 mm steel piston.
What thread does the brake hose connect with on this rear caliper?
The inlet uses a banjo bolt fitting with an M10 - 1.5 thread, and the bleeder screw is M10-1.0. Crush washers are included with the caliper.
How can I tell if a rear brake caliper is failing?
A pull to one side under braking, fluid near the piston boot or unevenly worn pads can mean a caliper is failing. Brakes are a safety system, so have a shop check it promptly.
