TERREPOWER 99P01049B rear left brake caliper for the 2018-2022 Honda Accord presses the brake pads against the rotor to slow the wheel. This remanufactured disc brake caliper is built for the rear left wheel.
- Floating design with one steel piston, 38 mm (1.50 in) in diameter
- Cast iron body with an E-coated finish
- Banjo bolt inlet fitting with an M10 - 1.0 thread
- Bleeder screw and cap with an M10-1.0 thread
Quick facts
- Part: TERREPOWER 99P01049B brake caliper
- Also called: disc brake caliper
- Fits: 2018-2022 Honda Accord
- Position: Rear left
- Material: Cast iron
- Condition: Remanufactured
A pull to one side when braking, a brake that drags or fluid around the piston boot can mean the caliper is worn, though a collapsed brake hose or worn brake pads can be behind the same signs, so find the cause before replacing it.
Fits
It is a direct-fit replacement for the 2018-2022 Honda Accord. This listing is one caliper for the rear left; the rear right is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: rear left
- Quantity for the rear left: 1
- Piston diameter: 38 mm (1.50 in)
- Piston quantity: 1
- Inlet thread: M10 - 1.0, banjo bolt
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: floating
- Condition: remanufactured
- Casting material: cast iron
- Piston material: steel
- Finish: E-coated
- Country of origin: Mexico
In the box
This listing holds one caliper, and the rear left takes one. It comes with the bracket, slides, dust boots, caliper and pad hardware, a bleeder screw with its cap and crush washers. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included; plan on new bolts, as the old ones may not be reusable.
Interchange / FMSI:
FMSI: D2102
Frequently Asked Questions
Is this the rear caliper for the 2018-2022 Honda Accord?
Yes. TERREPOWER 99P01049B is the rear left caliper for the 2018-2022 Honda Accord; the rear right side is a separate part.
Does this remanufactured caliper come with the bracket and slides?
Yes. This rear left caliper includes the bracket, slides, dust boots, caliper and pad hardware, bleeder screw with cap and crush washers, but not brake pads, shims, wear sensors or bracket bolts.
What size is the piston on caliper 99P01049B?
TERREPOWER 99P01049B has one steel piston, 38 mm (1.50 in) across, in a floating caliper with an M10 - 1.0 banjo bolt inlet.
Could a sticking rear left caliper cause pulling to one side?
Yes. A dragging caliper can make the car pull to one side, leave a burning smell after driving or wear one pad faster, and a shop can test the brake hydraulics.
Do I need to buy bracket bolts separately for this rear left caliper?
Yes. The bracket mounting bolts are not included, and the old ones may not be reusable, so plan on new bolts.
