PowerStop L2698 front left brake caliper for the 2003-2008 Toyota Corolla and other vehicles clamps the brake pads against the rotor to slow the wheel. This floating disc brake caliper slides on guide pins and has one piston.
- Part of the Autospecialty by PowerStop replacement caliper line
- Bolt-on ready, no modifications necessary
- 100% pressure tested and inspected
- New seals, guide pins, dust boots, bleeder screw and stainless steel abutment hardware clips
- High temperature EPDM rubber dust boots
- Assembly lubricant used for smooth caliper operation
Quick facts
- Part: PowerStop L2698 brake caliper
- Also called: disc brake caliper
- Fits: 2003-2008 Toyota Corolla and other vehicles
- Position: Front left
- Material: Cast iron (caliper casting), steel (piston)
- Condition: New
A sticking or leaking caliper can show up as the car pulling to one side, uneven pad wear or brake fluid around the wheel. Pads, rotors, hoses and tires can cause some of the same signs, so find the cause before you replace the caliper. During a brake service with the wheel off, look at the dust boot for tears and the piston area for wetness. Replace calipers as a pair across the axle when you can; this listing is one caliper for the front left, and the front right is a separate part.
Fits
This caliper fits the 2003-2008 Toyota Corolla, the 2003-2008 Toyota Matrix and the 2003-2008 Pontiac Vibe, with one caliper at the front left position of each.
Specifications
Fit and size
- Position: Front left
- Quantity for this position: 1
- Caliper type: Floating
- Piston quantity: 1
- Piston diameter: 57.02 mm
Build and materials
- Caliper casting material: Cast iron
- Piston material: Steel
- Color: Silver
- Integrated parking brake: No
- Condition: New
- Country of origin: China
In the box
One brake caliper, assembled with new seals, guide pins, dust boots, a bleeder screw and stainless steel abutment hardware clips. Brake pads, mounting bolts, a mounting bracket, a pad wear sensor and caliper grease are not included. Plan on new mounting bolts, since the old ones may not be reusable.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this the front left caliper for the 2003-2008 Toyota Corolla?
Yes. PowerStop L2698 is a front left brake caliper for the 2003-2008 Toyota Corolla. The front right side is a separate part.
Is PowerStop L2698 among the brake calipers for the 2003-2008 Toyota Matrix?
Yes. PowerStop L2698 fits the front left of the 2003-2008 Toyota Matrix, and the front right needs its own caliper.
Do PowerStop brake calipers like this one come with new seals and boots?
Yes. PowerStop L2698 is assembled with new seals, guide pins, dust boots and a bleeder screw. Pads, mounting bolts, a bracket and caliper grease are not included.
What size is the piston in this floating caliper?
This caliper has one steel piston with a diameter of 57.02 mm, and it is a floating design.
Does the PowerStop L2698 need any modifications to install?
No. The PowerStop L2698 is bolt-on ready with no modifications necessary, and each caliper is 100% pressure tested and inspected.
