Sealed H1517CPA piston set for the 2013-2018 Ram 1500 3.6L and other vehicles replaces worn pistons in the V6-3.6L engine, where each piston carries the combustion load and works with the rings to seal the cylinder.
- Cast with FM413 for strength and durability
- High-quality casting and machining give the performance and dependability of OE pistons, with a long service life
- State-of-the-art manufacturing with exacting tolerances
- Meets or exceeds OEM specifications
- Up-tilt ring grooves improve piston-to-ring sealing and give good blow-by control
Heavy blow-by, smoke from the exhaust or low compression can mean worn pistons or rings. These signs alone do not prove the pistons are the problem, since worn valve seals can also put smoke out the tailpipe.
This set is listed for a wide range of Chrysler, Dodge, Jeep, Ram and Volkswagen models, including the 2011-2017 Jeep Grand Cherokee 3.6L and the 2012-2017 Jeep Wrangler 3.6L. If your car is not named here, open the "Vehicles it fits" section and check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 6
- Compression height: 29.68 mm
- Piston pin outside diameter: 22.00 mm
- Top compression ring thickness: 1.20 mm
- Second compression ring thickness: 1.20 mm
- Oversized: No
Build and materials
- Type: cast piston set
- Piston material: hypereutectic
- Cast with FM413
- Country of origin: India
In the box
This listing is one engine piston set, and the engine takes six pistons. Assembly lubricant is not included.
Interchange: 224-3855 · P1117(6)STD
5184347AG · P1169
This part cross-references / interchanges with the following part numbers:
5184347AG, 2243855, P1169, P1117(6)STD, 224-3855
Frequently Asked Questions
Does the Sealed Power H1517CPA piston set fit the 2013-2018 Ram 1500 3.6L?
Yes, Sealed Power H1517CPA fits the 2013-2018 Ram 1500 3.6L and is also listed for the 2011-2017 Jeep Grand Cherokee 3.6L; open the "Vehicles it fits" section to check other models.
Does this piston set come with assembly lubricant?
No. Assembly lubricant is not included with this piston set, so buy it separately for the build.
What are the piston pin and compression height sizes on the Sealed H1517CPA?
Sealed Power H1517CPA has a 22.00 mm piston pin outside diameter and a 29.68 mm compression height. The top and second compression ring thickness is 1.20 mm.
Are these Sealed Power pistons hypereutectic?
Yes. The piston material is hypereutectic, and the pistons are cast with FM413 for strength and durability.
Does the 5184347AG number cross to this piston set?
Yes. 5184347AG is listed as an interchange number for Sealed Power H1517CPA, so you can use it to match this set against an older part.
