Standard Ignition ALS1440 front right ABS wheel speed sensor for the 1998-2002 Suzuki Esteem reads wheel rotation and sends the signal to the ABS module. The module uses that signal to spot a wheel that slows faster than the others.
- Constructed from durable synthetic material made to withstand harsh operating conditions
- Grommets and wire clips come on the harness for proper mounting and routing, saving technicians time
- Tested on vehicles for correct integration with electronic safety systems
- Sealed connector built for protection in harsh conditions
Quick facts
- Part: Standard Ignition ALS1440 ABS wheel speed sensor
- Fits: 1998-2002 Suzuki Esteem
- Position: Front right
- Material: Synthetic material
- Condition: New
An ABS or traction control warning light, or an ABS that stops working, can mean a wheel speed sensor has failed. A warning light alone does not prove the sensor is at fault; damaged wiring is another common cause.
Fits
It fits the 1998-2002 Suzuki Esteem and is tested on vehicles for proper fit. The front axle takes one sensor on each side; this listing is the right one, and the left is ordered separately.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1 for this position
- Mounting location: Spindle
- Number of bolt holes: 4
- Harness length: 32 in (812.8 mm)
Build and materials
- Material: Synthetic material
- Connector: 1 rectangular, male
- Terminals: 2 female blade
- Condition: New
- Country of origin: Japan
In the box
One ABS wheel speed sensor. Mounting hardware is not included, so plan on new bolts.
Interchange: ABS1550 · ABSE40093 · 531903 · 5621064G00
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
ABS1550, ABSE40093, 531903, ALS1440, 5621064G00
Frequently Asked Questions
Will the Standard Ignition ALS1440 fit a 1998-2002 Suzuki Esteem?
Yes. The Standard Ignition ALS1440 is a front right ABS wheel speed sensor for the 1998-2002 Suzuki Esteem. The left side takes its own sensor.
Does this Standard Ignition ABS wheel speed sensor come with mounting bolts?
No. Mounting hardware is not included with the Standard Ignition ALS1440. The box holds one sensor, so plan on new bolts.
How long is the harness on this ABS wheel speed sensor?
The harness is 32 inches (812.8 mm) long. It ends in one rectangular male connector with two female blade terminals.
Which signs can mean a front ABS wheel speed sensor needs attention?
An ABS warning light, a traction control light or an ABS that stops working can be signs. A shop can read the stored fault code to see which wheel is involved.
Is the connector on this front right ABS sensor sealed?
Yes. The Standard Ignition ALS1440 uses an OE-style sealed connector for protection in harsh conditions.
