Standard Ignition ALS585 rear right ABS wheel speed sensor for the 1995-1999 Hyundai Accent senses how fast the wheel turns and sends that signal to the ABS. This Standard Ignition ABS wheel speed sensor is engineered for precision performance and a long service life.
- Durable synthetic material made to withstand harsh operating conditions
- Harness comes with location grommets and wire clips for mounting and routing
- Tested on vehicles for correct integration with electronic safety systems
- Sealed connector for protection in harsh conditions
Quick facts
- Part: Standard Ignition ALS585 ABS wheel speed sensor
- Fits: 1995-1999 Hyundai Accent
- Position: Rear right
- Material: Synthetic
- Condition: New
An ABS warning light that stays on can mean a wheel speed sensor has stopped sending a signal. A damaged tone ring, a worn wheel bearing or a chafed wire can set off that light as well, so find the cause before you buy.
Fits
Engineered specifically for Hyundai vehicles, it is a direct-fit replacement for the 1995-1999 Hyundai Accent.
Specifications
Fit and size
- Position: Rear right
- Mounting location: Wheel
- Quantity per vehicle: 1
- Harness length: 31.75 in (800 mm)
- Bolt holes: 1
- Connector: 1, oval, male
- Terminals: 2, female, blade
Build and materials
- Material: Synthetic
- Connector: Sealed
- Condition: New
- Country of origin: Republic of Korea
In the box
This listing is one rear right sensor, and that side takes one; the rear left is a separate part ordered on its own. Mounting hardware is not included, so plan on a new mounting bolt.
Interchange: ABS695 · ABSD31120 · 531253 · 68122100 · 9568122100
This part cross-references / interchanges with the following part numbers:
ABS695, ABSD31120, 531253, 68122100, 9568122100, ALS585
Frequently Asked Questions
Does the Standard Ignition ALS585 fit the 1995-1999 Hyundai Accent at the rear right?
Yes. Standard Ignition ALS585 is the rear right ABS wheel speed sensor for the 1995-1999 Hyundai Accent. The rear left wheel uses a separate sensor.
Does the Standard Ignition ALS585 come with a mounting bolt?
No. Standard Ignition ALS585 comes without mounting hardware, so plan on a new mounting bolt. The harness does carry location grommets and wire clips.
How long is the harness on this rear right ABS sensor?
The harness is 31.75 inches (800 mm) long. It ends in one oval male connector with two female blade terminals.
How can I tell if a rear ABS wheel speed sensor is going bad?
A lit ABS warning light can be one sign. With the engine off and cool, you can look for a cracked or chafed wire or a damaged connector; a shop can test the signal.
Does the ALS585 replace ABS695?
Yes. ABS695 is one of the numbers this sensor replaces, along with ABSD31120 and 531253.
