Keep high-voltage spark headed to the right cylinder with the Standard Ignition Distributor Cap AL-140. It is a direct-fit replacement for the listed applications, including the 1966-1971 Dodge Charger, plus many other classic American Motors, Chrysler, DeSoto, Dodge, Fargo, Plymouth and Studebaker models. See the "Vehicles it fits" section for the full list and engine details.
As a global manufacturer of original equipment ignition products, Standard Ignition maintains complete quality control from componentry to finished product. Its distributor caps and rotors draw on decades of research and development.
- Cap material: Made of high dielectric strength, glass/mineral reinforced polyester resin. This is designed for less carbon tracking and greater resistance to electrical breakdown.
- RFI resistors: Fitted where specified. They are intended to help suppress radio static and voltage spikes.
- Terminals: Solid brass terminals, where available, are designed for better connections and greater resistance to electrical pitting and corrosion.
The distributor cap covers the top of the distributor. High voltage from the coil enters the cap, and the rotor passes it to each outer terminal and spark plug wire in firing order. Signs a cap may need replacing include cracks, carbon tracks, burned or corroded terminals, misfires, hard starting or rough running. Spark plugs, wires and the rotor can cause similar symptoms, so diagnose the cause before replacing parts.
Interchange: 3201796 · J3201796 · C152 · 1658534 · 2084654 · 2098852 · 2585000 · 2586000 · 3202808 · 3208613 · CAPB10602 · AL124 · 19112899 · 3112 · 335 · 336 · 339 · 38
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
3201796, J3201796, C152, 1658534, 2084654, 2098852, 2585000, 2586000, 3202808, 3208613, CAPB10602, AL124, 19112899, 3112, 335, 336, 339, 38
Frequently Asked Questions
Which vehicles does the Standard Ignition AL-140 distributor cap fit?
It fits many vehicles, including the 1966-1971 Dodge Charger. See the "Vehicles it fits" section for the full list and engine details.
What is the AL-140 cap made of?
It is made of high dielectric strength, glass/mineral reinforced polyester resin. This is designed for less carbon tracking and greater resistance to electrical breakdown.
What are signs a distributor cap may need replacing?
Cracks, carbon tracks, burned or corroded terminals, misfires, hard starting or rough running can be signs. Plugs, wires and the rotor can cause similar symptoms, so diagnose first.
Does the AL-140 use brass terminals and RFI resistors?
Solid brass terminals are used where available, and RFI resistors are fitted where specified to help suppress radio static and voltage spikes.
What part numbers does the AL-140 interchange with?
It cross-references numbers including 3201796, J3201796, C152, CAPB10602, AL124 and 19112899. The full interchange list appears in the description.
