Standard Ignition LX-348 ignition control module for the 1986-1988 Buick Century V6 3.8L, the 1989-1992 Century V6 3.3L and other vehicles energizes the ignition coils on a distributorless ignition system. It is designed to fix the inherent failure issues of the original equipment module.
- Copper slug heat sinks that carry heat away from the module
- High-temperature polymer housing that reduces moisture intrusion and minimizes vibration damage
- Double wire bonds for dependable connections under intense vibration
- Durability tested for 500 thermal cycles from -40C to +125C
- Responds to a weak crankshaft position sensor signal and starts energizing the coils at once for cold-weather starting
Quick facts
- Part: Standard Ignition LX-348 ignition control module
- Fits: the 1986-1988 Buick Century V6 3.8L, the 1989-1992 Century V6 3.3L and other vehicles
- Condition: New
A hard start in cold weather, a misfire or no spark can mean this module is worn, though the crankshaft position sensor or an ignition coil can produce those symptoms too, so find the cause before buying.
Fits
This ignition control module is a direct-fit replacement for the 1986-1988 Oldsmobile Cutlass Ciera V6 3.8L, the 1989-1992 Cutlass Ciera V6 3.3L and the 1989-1992 Oldsmobile Cutlass Cruiser V6 3.3L, and the application calls for one module. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Voltage: 12 V
- Connector: 1 female
- Terminals: 13 male blade terminals
- Mounting: external, bolt-on
Build and materials
- Ignition type: distributorless
- Housing: high-temperature polymer
- Heat sink: copper slug
- Condition: New
- Country of origin: United States
In the box
One ignition control module. Mounting hardware is not included, so plan on new mounting bolts, since the old ones may not be reusable.
Frequently Asked Questions
Is the Standard Ignition LX-348 the right ignition control module for a 1989-1992 Buick Century V6 3.3L?
Yes. Standard Ignition LX-348 fits the 1989-1992 Buick Century V6 3.3L and the 1986-1988 Century V6 3.8L, and each takes one module.
Are mounting bolts included with this bolt-on ignition control module?
No. Mounting hardware is not included with this module, so buy new bolts separately, since the old ones may not be reusable.
What connector and voltage does the Standard Ignition LX-348 ignition control module use?
Standard Ignition LX-348 has one female connector with 13 male blade terminals and runs on 12 volts.
Can a worn ignition control module make a V6 hard to start in cold weather?
A hard cold start can be one sign of a worn module. Testing ignition parts needs the engine running, so have a shop test it.
What temperature testing do these ignition control modules go through?
They are durability tested for 500 thermal cycles ranging from -40C to +125C.
