Dorman 520-325 front left lower control arm with ball joint for the 1995-1999 Dodge Neon and other vehicles connects the front left wheel to the suspension. This Dorman control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications.
- Dorman OE Solutions control arm in a standard replacement grade
- Additional coatings for rust and corrosion resistance
- Iron control arm, casting/forged, with rubber bushings
- Ball joint with a pinch stud type and a 14 mm thread diameter
- Tested for a smooth, stable ride and directional stability
Quick facts
- Part: Dorman 520-325 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1995-1999 Dodge Neon and other vehicles
- Position: Front left lower
- Material: Iron control arm, rubber bushings
- Condition: New
Clunks over bumps, vague steering or torn bushings can mean this arm or its ball joint is worn. These signs alone do not prove the arm is the problem; a worn tie rod end can feel much the same. This listing is one arm for the front left, the front right is a separate part, and both sides are normally replaced together. The 1995-1999 Dodge Neon takes one arm on each side.
Fits
This 1995-1999 Dodge Neon control arm also fits the 1995-1999 Plymouth Neon.
Specifications
Fit and size
- Position: front left lower
- Mounting hole diameter: 12.3 mm
- Ball joint thread diameter: 14 mm
- Maximum width: 288.5 mm
- Maximum length: 237 mm
Build and materials
- Control arm type: casting/forged
- Control arm material: iron
- Bushing material: rubber
- Ball joint stud type: pinch
- Grade: standard replacement
- Condition: new
- Country of origin: Taiwan
In the box
One control arm with ball joint and mounting hardware. A grease fitting is not included.
Installation notes
- Ball joint and bushings come pre-installed, which saves time and labor.
- The assembly comes pre-greased.
Interchange: 4826331-L
3555557021 · 4509775 · 4626273 · LR004010 · TC6261 · CA14189 · CK620256 · RK620256 · FA4254 · GS9677 · CMS9677 · 2605381 · 5CB25013 · SK100001 · SRK620256
This part cross-references / interchanges with the following part numbers:
3555557021, 4509775, 4626273, LR004010, TC6261, CA14189, CK620256, RK620256, FA4254, GS9677, CMS9677, 2605381, 5CB25013, SK100001, SRK620256, 4826331-L
Frequently Asked Questions
Does the Dorman 520-325 fit the 1995-1999 Plymouth Neon?
Yes. The Dorman 520-325 front left lower control arm with ball joint fits the 1995-1999 Plymouth Neon and the 1995-1999 Dodge Neon.
Do the Dorman control arm bushings come installed?
Yes. The bushings come pre-installed along with the ball joint. The bushing material is rubber.
What is this Dorman lower control arm made of?
The control arm is iron, a casting/forged type, with rubber bushings. Additional coatings give it rust and corrosion resistance.
How is a worn ball joint on a lower control arm checked?
Uneven front tire wear can be one sign. Checking the ball joint for play means raising the vehicle, so a shop can test it.
Does the Dorman 520-325 include a grease fitting?
No. A grease fitting is not included, but the assembly comes pre-greased and mounting hardware is included with the Dorman 520-325.
