Delphi TC6342 front right lower control arm with ball joint for the 2006-2011 Ford Crown Victoria and other vehicles connects the front right wheel to the chassis and lets it pivot. This control arm and ball joint assembly holds the wheel in position while the suspension moves and the wheel steers.
- Control arm withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti Corrosion protection applied to each part
Quick facts
- Part: Delphi TC6342 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2006-2011 Ford Crown Victoria and other vehicles
- Position: Front right lower
- Condition: New
A worn arm or ball joint can show up as a clunk over bumps from the front suspension, loose or wandering steering, or uneven front tire wear. These signs alone don't prove this arm is the problem, since a worn tie rod end can produce similar looseness.
Fits
This is a control arm for the 2006-2011 Ford Crown Victoria and the 2006-2011 Mercury Grand Marquis. The listing is one arm for the front right, so the front left is a separate part, and both sides of the front axle are normally replaced together. A 2006-2011 Ford Crown Victoria needs one arm on this side.
Specifications
Fit and size
- Position: front right lower
- Quantity per vehicle: 1
Build and materials
- Type: control arm with ball joint
- Ball studs: machined to micron tolerances
- Construction: robot-welded
- Corrosion protection: anti-corrosion protection applied to each part
- Condition: new
Interchange: 522-754 · 523-669 · 523-670 · 6W7Z 3078-B
CB85244 · CB85244PR · RK620218 · CMK80395 · GK80395 · JTC2020
This part cross-references / interchanges with the following part numbers:
522-754, 523-669, 523-670, 6W7Z 3078-B, CB85244, CB85244PR, RK620218, CMK80395, GK80395, JTC2020
Frequently Asked Questions
Can I use this as a 2006-2011 Mercury Grand Marquis control arm?
Yes. Delphi TC6342 is a front right lower control arm with ball joint for the 2006-2011 Mercury Grand Marquis as well as the 2006-2011 Ford Crown Victoria.
Is this Delphi control arm sold with the ball joint attached?
Yes. The ball joint is part of the arm, so you get one assembly. The ball studs are machined to micron tolerances.
Is TC6342 only for the front right lower position?
Yes. Delphi TC6342 is made for the front right, lower position. The front left lower arm is a separate part.
What temperature and salt spray testing do these arms go through?
The parts withstand temperatures below -40 degrees C and over 120 degrees C, and they are exposed to 720 hours of salt spray.
Does Delphi TC6342 cross to 522-754?
Yes. 522-754 is on this part's interchange list, along with 523-669 and 523-670.
