Delphi TC2496 front left lower control arm with ball joint for the 2011-2017 Nissan Juke and other vehicles links the wheel to the chassis. This control arm and ball joint assembly puts the arm and the ball joint in one piece, so the wheel can pivot as the suspension moves.
- Each control arm gets 100% crack detection and ultrasonic flaw detection
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded control arm for consistent performance and quality
- Anti-corrosion protection applied to each part
- Withstands temperatures below -40 degrees C and over 120 degrees C, and is exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC2496 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2011-2017 Nissan Juke and other vehicles
- Position: Front left lower
- Condition: New
A clunk over bumps, uneven tire wear or vague steering can be signs of a worn lower arm or ball joint. Tie rod ends, sway bar links, strut mounts and wheel bearings can be behind similar signs, so find the cause before buying.
Fits
It fits the 2011-2017 Nissan Juke and the 2011-2012 Nissan Leaf. The front axle takes one arm on each side. This listing is the left arm only, the front right is a separate part, and the pair is normally done at the same time.
Specifications
Fit and size
- Position: front left lower
- Quantity per vehicle: one per side of the front axle
- Sold individually: one arm per listing
Build and materials
- Type: control arm with ball joint
- Construction: robot-welded
- Ball studs: machined to micron tolerances
- Corrosion protection: anti-corrosion protection on each part
- Condition: new
Interchange: 101-7692 · 102-7695 · 622.42092 · 54501-1KA0A · 54501-1KA0B · 54501-1KA1B · 522-913
545011KK0B · 545015SN1A · CB69283 · CB69283PR · CK621157 · K621157 · RK621157 · CMS301017 · CMS301223 · GS301017 · JTC2278
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-7692, 102-7695, 622.42092, 54501-1KA0A, 54501-1KA0B, 54501-1KA1B, 545011KK0B, 545015SN1A, 522-913, CB69283, CB69283PR, CK621157, K621157, RK621157, CMS301017, CMS301223, GS301017, JTC2278
Frequently Asked Questions
Does the Delphi TC2496 fit the 2011-2012 Nissan Leaf?
Yes. Delphi TC2496 fits the 2011-2012 Nissan Leaf as well as the 2011-2017 Nissan Juke, in the front left lower position.
Is this Delphi front lower control arm protected against rust?
Yes. Delphi applies anti-corrosion protection to each part and exposes its parts to 720 hours of salt spray.
Are the ball studs on the Delphi TC2496 machined to a set tolerance?
Yes. Delphi machines the ball studs on the TC2496 to micron tolerances, for durability and smooth joint operation.
What can a clunk over bumps mean on a front lower control arm?
A worn ball joint or control arm bushing can cause that clunk, and so can other suspension parts. Uneven tire wear and vague steering are other common signs.
Does the Delphi TC2496 replace number 54501-1KA0A?
Yes. 54501-1KA0A is one of the numbers this Delphi TC2496 replaces, and it appears on the Interchange line with the others.
