Dorman - OE Solutions Suspension Control Arm and Ball Joint Assembly P/N:520-520
Help keep your front end steady and predictable with the Dorman control arm 520-350, a front right lower control arm with ball joint built to directly replace the original assembly on the 1997-2004 Dodge Dakota and 1998-2003 Dodge Durango. See the Buyer's Guide tab for engine-specific details.
The ball joint and bushings arrive already installed, so this Dorman suspension control arm and ball joint assembly lets you replace the whole unit instead of pressing in individual components, which saves time and labor.
Signs this part may need replacing include clunking over bumps, loose or wandering steering, uneven tire wear, cracked bushings, or a loose ball joint. Diagnose the cause first, because other suspension components can produce similar symptoms. Replacing the left and right sides together is recommended for balanced handling, and a wheel alignment check is advised after installation.
Interchange: 52106116-R
52106116R · 51206116AB · 52038348 · 52058334 · 52058336 · 52058338 · 52059018 · 52106116AA · 52106450AA · TC6295 · CA16138 · RK620475 · FA3026 · GS20373 · CMS20373 · 2606025 · 5CB25031 · JTC2335
This part cross-references / interchanges with the following part numbers:
What does a Dorman lower control arm like 520-350 do?
It connects the front right wheel assembly to the vehicle's frame, so the suspension can move up and down while the ball joint acts as the steering pivot. Its bushings help absorb road vibration.
Is this the right control arm for a 1998-2003 Dodge Durango?
It is listed for the 1998-2003 Dodge Durango in the front right lower position. Check the Buyer's Guide tab for the full fitment and engine details.
What comes with the assembly?
Each assembly comes with the ball joint and bushings pre-installed. You don't need to press those components in separately, which saves time and labor.
Is it protected against rust?
Yes. It has additional coatings that provide rust and corrosion resistance.
Should I get an alignment after installing it?
Yes, a wheel alignment check is recommended after you replace a control arm. Consult the vehicle service information for the correct fasteners and whether the originals may be reused.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.