TERREPOWER 503-0122 steering gear for the 1984-1995 Jeep Cherokee and other vehicles turns steering wheel input into wheel movement with power assist. This remanufactured unit is designed for dependability and reliability throughout the service life of the vehicle.
- Remanufactured unit with power assist
- 3.125 turns lock to lock
- Pressure port thread M18X1.5 and return port thread M16X1.50, both with O-ring attachment
- 26-spline input shaft and 32-spline output shaft with a 7/8X14 output thread
Quick facts
- Part: TERREPOWER 503-0122 steering gear
- Fits: the 1984-1995 Jeep Cherokee and other vehicles
- Condition: Remanufactured
Heavy or loose steering, a groan when turning or fluid seeping around the gear can mean the steering gear is worn. Before you replace it, rule out a leaking hose, a slipping belt and worn tie rod ends, which can produce similar signs. If the gear is the cause, this unit replaces it.
Fits
The vehicles it fits include the 1984-1995 Jeep Cherokee, the 1993-1995 Jeep Grand Cherokee and the 1996-2003 Chevrolet S10. If your car is a different one, you can look it up in the "Vehicles it fits" section on this page.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting holes: 3
- Input shaft diameter: 18.35 mm (0.72 in)
- Input shaft length: 25.78 mm (1.01 in)
- Output shaft diameter: 31.98 mm (1.25 in)
Build and materials
- Type: power
- Condition: remanufactured
- Country of origin: Mexico
In the box
One remanufactured steering gear with an installation kit. This listing is one steering gear, and the vehicle needs one.
Frequently Asked Questions
Is the TERREPOWER 503-0122 a 1984-1995 Jeep Cherokee steering gear?
Yes. TERREPOWER 503-0122 fits the 1984-1995 Jeep Cherokee and the 1996-2003 Chevrolet S10, and drivers of other vehicles can look theirs up in the "Vehicles it fits" section.
What comes with the TERREPOWER 503-0122 steering gear?
The listing is one remanufactured steering gear with an installation kit. The vehicle needs one gear.
What thread sizes do the ports on this steering gear use?
The pressure port is M18X1.5 and the return port is M16X1.50. Both ports attach with O-rings.
How many splines are on the shafts of this steering gear?
TERREPOWER 503-0122 has a 26-spline input shaft and a 32-spline output shaft. The output shaft is 31.98 mm (1.25 in) across with a 7/8X14 thread.
Can I keep driving with a leaking or loose-feeling steering gear?
No. Have the steering checked and the part replaced promptly; a shop can test the gear and its hoses.
