Front Wheel Bearing and Hub Assembly for 2006-2012 Mitsubishi Eclipse & More - Timken HA590108

$235.99

Vehicles this part fits

    Part number: HA590108
    UPC: 053893563442
    Condition: New
    Weight: 8.50 LBS
    Item Package Quantity: 1
    $235.99
    Adding to cart… The item has been added

    Have questions?

    Timken Wheel Bearing and Hub Assembly P/N:HA590108
    Timken Wheel Bearing and Hub Assembly P/N:HA590108
    $235.99
    $235.99

    Timken HA590108 front wheel bearing and hub assembly for the 2006-2012 Mitsubishi Eclipse and other vehicles lets the wheel turn on a pre-greased, pre-sealed hub unit. The bearing and hub come together as one preset assembly.

    • Low runout reduces noise and vibration and improves braking performance
    • Seals have a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes against installation damage
    • Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for higher load carrying capacity
    • ABS sensors are 100% tested to monitor wheel speed for the anti-lock braking system

    Quick facts

    • Part: Timken HA590108 wheel bearing and hub assembly
    • Fits: 2006-2012 Mitsubishi Eclipse and other vehicles
    • Position: Front
    • Condition: New

    A humming or rumbling noise that rises with speed, or vibration from a front wheel, can mean the bearing is worn. Before you replace this hub assembly, rule out the tires, brake parts and other suspension parts as the source, because a tire or brake problem can feel much the same from the driver's seat.

    Fits

    It fits the 2006-2012 Mitsubishi Eclipse, the 2004-2008 Mitsubishi Endeavor and the 2004-2011 Mitsubishi Galant. The front axle uses one on each side, two in all. This listing is one side; the other side of that axle is normally done at the same time.

    Specifications

    Fit and size

    • Position: Front
    • Quantity per vehicle: 2
    • Drive type: Driven
    • Bolt circle diameter: 114.30 mm (4.500 in), 5 wheel studs
    • Flange diameter: 142.00 mm (5.590 in)
    • Flange offset: 40.60 mm (1.598 in)
    • Flange bolt holes: 4
    • Hub pilot diameter: 87.00 mm (3.425 in)
    • Brake pilot diameter: 69.00 mm (2.717 in)
    • Wheel pilot diameter: 67.00 mm (2.638 in)
    • Spline quantity: 27

    Build and materials

    • Type: preset hub unit assembly, pre-greased and pre-sealed
    • Condition: New

    Interchange: 051-6245 · 400.46003
    WE60425 · 513129 · 513219 · BR930413

    This part cross-references / interchanges with the following part numbers:

    WE60425, 051-6245, 400.46003, 513129, 513219, BR930413

    Frequently Asked Questions

    Is the Timken wheel bearing and hub assembly HA590108 the right one for the 2006-2012 Mitsubishi Eclipse?

    Yes. Timken HA590108 is a front hub assembly that fits the 2006-2012 Mitsubishi Eclipse. It has a 114.30 mm bolt circle and five wheel studs.

    How many Timken front wheel bearings does the 2004-2011 Mitsubishi Galant take?

    The 2004-2011 Mitsubishi Galant takes two, one on each side of the front axle. Timken HA590108 is sold as a single front hub assembly.

    Are Timken hub bearings like the HA590108 pre-greased and sealed?

    Yes. This hub unit is preset, pre-greased and pre-sealed. Its seals have a reinforced outer case and a ribbed rubber inner diameter.

    Are the ABS sensors on Timken wheel hubs tested?

    Yes. Timken's ABS sensors are 100% tested to monitor wheel speed for the anti-lock braking system.

    What are the pilot sizes on this Timken wheel bearing?

    Timken HA590108 has an 87.00 mm (3.425 in) hub pilot diameter and 27 splines. Its brake pilot is 69.00 mm and its wheel pilot is 67.00 mm.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review