Timken HA590062 front right wheel bearing and hub assembly for the 2004-2008 Chevrolet Colorado and other vehicles carries the wheel and lets it turn on a Timken wheel bearing. The design, materials and manufacturing process are controlled through OE-developed tests.
- Hub unit bearing assembly that comes preset, pre-greased and pre-sealed
- Low runout reduces noise and vibration and helps braking performance
- Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes to prevent installation damage
- Bearings with precision profiles, uniform internal geometry and enhanced surface finishes to increase load carrying capacity and extend bearing life
- ABS sensors are 100% tested to monitor wheel speed for the anti-lock braking system
Quick facts
- Part: Timken HA590062 wheel bearing and hub assembly
- Fits: 2004-2008 Chevrolet Colorado and other vehicles
- Position: Front right
- Condition: New
A humming or growling noise that changes with speed, vibration or a loose feel at the wheel can mean the wheel bearing is worn. A tire problem, a brake rotor or a suspension joint can bring on a similar hum or shake, so find the cause before buying. Front wheel bearings are normally replaced as a pair, and this listing is one.
Fits
Vehicles it fits include the 2004-2008 Chevrolet Colorado, the 2004-2008 GMC Canyon and the 2007-2008 Isuzu I-290. If your car is not one of these, look it up in the "Vehicles it fits" section on this page.
Specifications
Fit and size
- Position: Front right
- Bolt circle: 139.70 mm (5.500 in), 6 wheel studs
- Flange bolt holes: 4
- Flange diameter: 184.16 mm (7.250 in)
- Flange offset: 67.26 mm (2.648 in)
- Brake pilot diameter: 100.09 mm (3.941 in)
- Hub pilot diameter: 85.02 mm (3.347 in)
- Wheel pilot diameter: 99.53 mm (3.919 in)
Build and materials
- Type: Hub unit bearing assembly, preset, pre-greased and pre-sealed
- Drive type: Non-driven
- Condition: New
In the box
One wheel bearing and hub assembly for the front right. The front right side takes one; the front left is a separate part ordered on its own.
Interchange: 407.66010
WE61763 · 515105 · BR930702
This part cross-references / interchanges with the following part numbers:
WE61763, 407.66010, 515105, BR930702
Frequently Asked Questions
Is this Timken wheel bearing and hub assembly right for the 2004-2008 GMC Canyon?
Yes. Timken HA590062 fits the 2004-2008 GMC Canyon as its front right hub. For other vehicles, look in the "Vehicles it fits" section.
What bolt circle do these Timken hub bearings have?
Timken HA590062 has a 139.70 mm (5.500 in) bolt circle with 6 wheel studs, and its flange has 4 bolt holes.
Why is my front right wheel humming, and could Timken front wheel bearings be the cause?
A hum or growl that changes with speed, or a loose feel at the wheel, can mean a worn bearing. Have it checked promptly rather than driving on it.
Do these Timken wheel hubs come pre-greased?
Yes. This hub unit comes preset, pre-greased and pre-sealed.
Is 515105 an interchange number for Timken HA590062?
Yes. 515105 is listed as an interchange number for Timken HA590062, along with 407.66010, WE61763 and BR930702.
