Replace a stripped, bent or broken stud with the Dorman wheel lug stud 610-507 from Dorman - Autograde. It is an M12-1.50 serrated wheel stud made of carbon steel, and it gives the lug nut a threaded anchor to clamp the wheel to the hub. It fits many vehicles, among them the 2015-2025 Hyundai Sonata, 2016-2020 Kia Optima and 2011-2025 Kia Sorento. It is cataloged for both front and rear positions on the listed applications, and the full list is in the "Vehicles it fits" section.
Specifications: M12-1.50 thread, serrated 13.0mm knurl, 44.8mm length.
- Durable material: The carbon steel meets SAE automotive industry standards for strength and hardness.
- Corrosion resistant: Extensive salt-spray testing helps the stud stand up to rust.
- Tensile tested: These lug studs undergo industry-standard proof-load testing for strength.
- Trustworthy quality: A team of professional engineers and quality-control specialists in the United States backs the line.
A wheel lug stud is pressed into the hub or axle flange by its serrated knurl, and the lug nut threads onto it to hold the wheel in place. Signs a stud may need replacing include stripped or damaged threads, a bent or broken stud, or a stud that spins in the flange. Follow the vehicle service information for installation and lug nut torque.
Interchange: 517523D000 · 527552E000 · BP4K33062 · BP4L33062 · C23633062
This part cross-references / interchanges with the following part numbers:
517523D000, 527552E000, BP4K33062, BP4L33062, C23633062
Frequently Asked Questions
What does the Dorman 610-507 lug stud do?
It is a threaded stud pressed into the hub or axle flange. The lug nut tightens onto it to clamp the wheel to the vehicle.
What are the thread size and dimensions of this wheel stud?
It has an M12-1.50 thread, a serrated 13.0mm knurl and a 44.8mm length.
Does it fit my 2015-2025 Hyundai Sonata or 2011-2025 Kia Sorento?
It is listed for the 2015-2025 Hyundai Sonata, 2016-2020 Kia Optima and 2011-2025 Kia Sorento, among many other vehicles. Check the "Vehicles it fits" section for your exact vehicle.
What is it made of and how is it tested?
It is made of carbon steel that meets SAE automotive industry standards for strength and hardness. It is put through salt-spray corrosion testing and industry-standard proof-load testing.
When should a wheel lug stud be replaced?
Signs include stripped or damaged threads, a bent or broken stud, or a stud that spins in the flange. Follow the vehicle service information for installation and lug nut torque.
