Keep lubricant in and road grit out with the SKF wheel seal 24917, which is also listed as an axle spindle seal. It is a direct-fit replacement for many vehicles, among them the 1976-1995 Ford F-150 and 1969-1994 Ford F-250. Depending on the application, it is cataloged for the front, rear, or front inner position.
- Rigid metal case: The body is formed from deep drawn sheet steel, giving it a stiff, stress-resistant case.
- Steel garter spring: The garter spring uses cold drawn steel wire and is designed for fluid retention.
- Dirt and water protection: The seal is built to help shield the wheel end from dirt and water.
- Correct fit: It is made with a tested design and quality materials for correct fit.
SKF invented the first integrated shaft seal in 1928. Since then the company has continued to develop new seal designs and bonding techniques. Its seals are built to specific designs from premium materials chosen to suit the application and its operating environment, and their job is to keep lubricants in and contaminants out.
A wheel seal closes off the wheel end so the lubricant stays where it belongs. Signs this part may need replacing include grease or oil seeping around the hub or onto brake components. The remaining vehicles and any engine-specific applications are listed in the "Vehicles it fits" section.
Interchange: 35313-1
353131 · 157317 · 4137766 · 973924917 · 975924917 · C9TA1175B2 · C9TA1175B3 · C9TZ1175B1 · D3TZ1175A · D5UZ1175A · E0TA1175BA · E4TZ1190A · EOTA1175BA · ZZL033041A · 35313
This part cross-references / interchanges with the following part numbers:
157317, 4137766, 973924917, 975924917, C9TA1175B2, C9TA1175B3, C9TZ1175B1, D3TZ1175A, D5UZ1175A, E0TA1175BA, E4TZ1190A, EOTA1175BA, ZZL033041A, 35313, 35313-1
Frequently Asked Questions
What does the SKF wheel seal 24917 do?
It seals the wheel end. It holds lubricant in and helps keep dirt and water out on the listed trucks, vans and SUVs.
What is the seal's case made of?
SKF forms the body from deep drawn sheet steel to make a rigid, stress-resistant metal case. The garter spring is made from cold drawn steel wire.
Which position does this seal fit?
Depending on the application, SKF catalogs 24917 for the front, rear, or front inner position. See the "Vehicles it fits" section for the position on your vehicle.
What are signs a wheel seal may need replacing?
Grease or oil seeping around the hub, lubricant on brake parts, or grit inside the wheel end may indicate a worn seal. Diagnose the cause before replacing parts.
Which vehicles does it fit?
Applications include the 1976-1995 Ford F-150 and 1969-1994 Ford F-250, among many others. See the "Vehicles it fits" section for the full list.
