Delphi HP10155 fuel pump hanger for the 1986-1990 Ford E-150 Econoline V8 5.0L, the 1987-1990 E-150 Econoline 6-cylinder 4.9L, the 1988-1990 E-150 Econoline V8 5.8L and other vehicles mounts in the fuel tank and carries the float arm for the gas gauge. This fuel pump hanger assembly supports the fuel delivery parts inside the tank.
- Designed for extreme temperatures and quick engine starts
- Metal tubes routed so they never touch the tank, which removes noise and vibration in operation
- Empty float height and float retention set for a correct gas gauge reading
- Part is validated and tested
- Reduced amperage draw means less load on the electrical system
Quick facts
- Part: Delphi HP10155 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: the 1986-1990 Ford E-150 Econoline V8 5.0L, the 1987-1990 E-150 Econoline 6-cylinder 4.9L, the 1988-1990 E-150 Econoline V8 5.8L and other vehicles
- Condition: New
A gas gauge that reads wrong, or fuel delivery trouble, can point to a worn hanger, and other faults can look the same. With the engine off, look over the fuel pump fuse and the visible wiring first, and leave fuel pressure testing to a shop.
Fits
The 1986-1989 Ford E-350 Econoline V8 7.5L and the 1986-1989 Ford E-150 Econoline Club Wagon V8 5.0L take this hanger too, as do many other vehicles, and each takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
- Quantity per vehicle: 1
- Condition: New
- Float arm: included
In the box
One fuel pump hanger with float arm, seal, lock ring and instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the hanger.
- The instruction sheet in the box covers the steps.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Will the Delphi HP10155 fit a 1986-1990 Ford E-150 Econoline V8 5.0L?
Yes. Delphi HP10155 is listed for the 1986-1990 Ford E-150 Econoline V8 5.0L, and that vehicle takes one hanger.
Does the Delphi HP10155 hanger come with a seal and lock ring?
Yes. The box holds the hanger with float arm, seal, lock ring and an instruction sheet.
Why are the metal tubes on this fuel pump hanger routed away from the tank?
The metal tubes are routed so they never contact the tank at any point, which removes noise and vibration during vehicle operation.
What can a failing fuel pump hanger do to the gas gauge?
A gauge that reads wrong or hard starting can be signs of a failing hanger, but other faults can cause them too. A shop can test fuel delivery.
Do I need to clean the tank when installing the Delphi HP10155?
Yes. Check and clean the fuel tank during installation, and follow the instruction sheet that comes with the Delphi HP10155 for the steps.
